Tips for Searching in Different Environments
There are many factors which influence the sensitivity and accuracy of detecting objects, including the angle, depth, size and oxidation
of the target object. Various soil or seawater conditions, and also electromagnetic and electrical interference surrounding the target can also affect readings. Other metal detectors in the area will also cause interference, so when there is more than one unit in use, be sure they are at least 10 yards apart. Some ways to help increase success are:
1.If there is interference from similar metal detectors in your searching area, lower the SENS setting to stop the interference.
2.If there is interference from electrical cables, TV, radio, or other electrical devices in your searching area, lower the SENS setting.
3.When searching in highly mineralized areas, the unit may sound even if there is no metal. Lower the SENS setting, set the DISC to high and increase the distance of the Search Coil from the ground until the false signal disappears. To set the DISC setting, place a test metal object
in highly mineralized earth or wet sand and adjust the setting before beginning.
4.When searching in a trash area, set the DISC to the middle setting so that the unit can reject most invaluable metals such as nails, bottle caps, cans, and small pieces of iron.
5.Move all metal digging tools when searching.
6.The SENS level is generally opposite the DISC setting. The higher the sensitivity level is, the worse the discrimination will be. You can lower the sensitivity to have better discrimination.
Maintenance And
Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation: Turn the Power Switch of the tool off and remove the batteries from the tool before performing any inspection, maintenance, or cleaning procedures.
Do not use damaged equipment. Have the problem corrected before further use.
Cleaning and Maintenance
1.BEFORE EACH USE, inspect the general condition of the tool. Check for loose hardware, misalignment or binding of parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
SKU 67378 | For technical questions, please call | Page 11 |