Harbor Freight Tools 43150 operating instructions Testing Batteries, Using Earphones

Page 4
Figure 8
Battery Installation
The Metal Detector requires the use of six AA bateries. Do not mix old and new batteries and do not mix different types of batteries.
1. If the Metal Detector is on, turn the volume on the control housing to OFF (see Figure 4).
2. Press on the battery compartment cover and slide the cover
Figure 4
off in the direction of the arrow (see Figure 5).
3. Insert the batteries into the compartment as indicated by the polarity symbols (+ and -) which are marked inside the compartment (see Figure 6) Replace the cover.
Remember to remove batteries if you do not plan on using the Metal Detector for a week or more.

Figure 5

Figure 6

Testing Batteries:

Always test the battery power when the Metal Detector does not turn on, has weak volume, will not tune properly, or has erratic operation.

Rotate VOLUME away from OFF and set OPERATE / BATT to BATT TEST (see Figure 7).

If the pointer on the viewmeter is between 3 and 6 (green area), the batteries have enough power to operate the detector. If the pointer is not in the green area, replace the batteries.

Figure 7

Using Earphones:

Stereo earphones (not included) can be connected to the Metal Detector. Using earphones saves battery power and makes it easier to identify changes in the sound patterns. Earphones are connected to the ear jack on the side of the Control Housing (see Figure 8). When using earphones, protect your hearing by:

a.Set the volume to the lowest setting before you begin listening. Adjust the volume to a comfortable level.

b.Never listen at extremely high volume levels; permanent hearing loss can result.

c.Once the volume is set, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing.

#43150

Page 4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents For technical questions and replacement parts, please call Metal DetectorSpecifications Save This ManualSafety Warnings and Precautions Preparing to Operate Adjusting the StemAdjusting the Search Coil UnpackingTesting Batteries Using EarphonesTo Test and Use the Metal Detector Turning on and Tuning the Metal DetectorFor indoor test Outdoor Testing and Use Fine Tuning the Metal DetectorTroubleshooting Problem Suggestion for Cure #43150 #43150 #43150 #43150 #43150 Parts Diagram

43150 specifications

Harbor Freight Tools, a well-known retailer in the tool and equipment industry, offers a wide range of products catering to DIY enthusiasts and professionals alike. One of the standout items in their inventory is the Harbor Freight Tools 43150, a multi-function tool that has gained popularity for its versatility and performance.

The Harbor Freight Tools 43150 is a 10-inch table saw designed to provide precision and power for various woodworking projects. One of its main features is the powerful 15-amp motor that is capable of delivering up to 5,000 RPM. This ensures that the saw can handle tough materials with ease, making it an ideal choice for both novice and experienced woodworkers.

Portability is another significant characteristic of the 43150. Weighing just over 60 pounds, it comes equipped with a convenient rolling stand that allows for easy setup and transport. This feature is particularly beneficial for those who often move their tools to different job sites or workshops.

In terms of safety, the table saw incorporates several essential features. An adjustable blade guard ensures that the operator’s hands are kept safe from the spinning blade during use. Additionally, the saw has a kickback prevention system, which is crucial for maintaining control and minimizing the risk of accidents.

The Harbor Freight Tools 43150 also boasts user-friendly adjustments. The quick-release miter gauge allows for precise angle cuts, while the bevel adjustment enables users to create angled cuts up to 45 degrees. The large tabletop provides ample workspace, accommodating larger materials with ease.

Equipped with a durable and sturdy construction, the 43150 is built to last, making it a reliable choice for daily use. The included blade is designed to provide clean, accurate cuts right out of the box, although compatibility with other blades allows for further customization based on specific project needs.

In summary, the Harbor Freight Tools 43150 is a robust, reliable, and versatile table saw that meets the demands of various woodworking projects. Its combination of power, portability, safety features, and user-friendly adjustments makes it an essential tool for anyone serious about woodworking. Whether you are a hobbyist or a professional, the 43150 is designed to deliver performance and reliability with every use.
Top Page Image Contents