Outdoor Testing and Use | Harbor Freight Tools 43150 instruction

For Indoor Test (continued)

5.If the detector detects the material, it sounds a tone and the pointer moves to the left (ferrous) or to the right (non-ferrous) while the detector determines the type of metal it is detecting (see Figure 13).

6.If the detector does not detect the material, the battery power

may be low. Also verify that the search coil is properly connected. The detector may also need to be fine tuned (see directions below and on the next page.

Figure 13

Outdoor Testing and Use:

1.Locate an area outdoors where there is no metal present. Place a sample of the material to be tested (coin or gold ring) on the ground.

2.Rotate VOLUME about two-thirds clockwise.

3.Press and release the red button on the handle. Slowly rotate TUNE until the pointer is at or near 0. A tone should be barely heard.

4.With the search coil being held approximately 1 to 2

	inches above the ground, slowly move the search coil over
	the area where you placed the sample. Sweep in a side to
	side motion as follows:
	Sweep slowly to avoid missing targets. Never raise the sweep
	coil while sweeping; sweep back and forth as if it was a	Figure 14
	pendulum (see Figure 14).	Figure 14
	pendulum (see Figure 14).

If the detector successfully detects the material, it will sound a tone and the pointer will move to the type of metal it found. If nothing was detected, try again (make sure the search coil is being moved properly).

The detector will respond strongly when it detects most valuable metal oljects. If the signal does not repeat after being swept over the target a few times, the target is probably junk metal.

False signals can occur from electrical interference, large, irregular pieces of junk metal, or finding trash on the ground. False signals usually occur broken or are non-repeat- able.

After finding a metal item, wait a few seconds after the tone stops before continuing; this allows the detector time to reset. You can also press the red button on the handle to return the pointer to the center of the viewmeter.

Fine Tuning the Metal Detector:

Once you practice with the unit, you can fine tune it to make it more selective in what is

found. The ability to distinguish between different types of metal is termed discrimination.

#43150

Page 6

43150 specifications

Harbor Freight Tools, a well-known retailer in the tool and equipment industry, offers a wide range of products catering to DIY enthusiasts and professionals alike. One of the standout items in their inventory is the Harbor Freight Tools 43150, a multi-function tool that has gained popularity for its versatility and performance.

The Harbor Freight Tools 43150 is a 10-inch table saw designed to provide precision and power for various woodworking projects. One of its main features is the powerful 15-amp motor that is capable of delivering up to 5,000 RPM. This ensures that the saw can handle tough materials with ease, making it an ideal choice for both novice and experienced woodworkers.

Portability is another significant characteristic of the 43150. Weighing just over 60 pounds, it comes equipped with a convenient rolling stand that allows for easy setup and transport. This feature is particularly beneficial for those who often move their tools to different job sites or workshops.

In terms of safety, the table saw incorporates several essential features. An adjustable blade guard ensures that the operator’s hands are kept safe from the spinning blade during use. Additionally, the saw has a kickback prevention system, which is crucial for maintaining control and minimizing the risk of accidents.

The Harbor Freight Tools 43150 also boasts user-friendly adjustments. The quick-release miter gauge allows for precise angle cuts, while the bevel adjustment enables users to create angled cuts up to 45 degrees. The large tabletop provides ample workspace, accommodating larger materials with ease.

Equipped with a durable and sturdy construction, the 43150 is built to last, making it a reliable choice for daily use. The included blade is designed to provide clean, accurate cuts right out of the box, although compatibility with other blades allows for further customization based on specific project needs.

In summary, the Harbor Freight Tools 43150 is a robust, reliable, and versatile table saw that meets the demands of various woodworking projects. Its combination of power, portability, safety features, and user-friendly adjustments makes it an essential tool for anyone serious about woodworking. Whether you are a hobbyist or a professional, the 43150 is designed to deliver performance and reliability with every use.