Harbor Freight Tools 68526 owner manual Grounding, High Altitude Operation, Peration

Page 8

Safety

Setup

O

Initial Tool Set Up/Assembly

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

To prevent serious injury:

Operate only with proper spark arrestor installed.

Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required.

The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

CAUTION: This generator is not intended to power sensitive electronic equipment without the addition of an appropriate line conditioner and surge protector (both not included). Sensitive electronic equipment includes, but is not limited to, audio/video equipment, some television sets, computers, and printers. Sensitive electronic equipment should be operated on approved inverter type generators or pure sine wave generators.

Note: Wheel Kit, item # 68531 (sold separately) can be used with this generator.

Grounding

The Generator must be properly grounded before

Terminal on the Control Panel to a grounding rod

use. Have the unit grounded by a qualified

(not included) that has been driven at least 24

electrician if you are not qualified to do so.

inches deep into the earth. The grounding rod must

To ground the Generator, connect a #6 AWG

be an earth-driven copper or brass rod (electrode)

which can adequately ground the Generator.

grounding wire (not included) from the Grounding

 

High Altitude Operation

 

peration

The fuel system on this generator may be influenced by operation at higher altitudes. Proper operation can be ensured by installing an altitude kit when required. See the table at right to determine when an altitude kit is required. Operating this generator without the proper altitude kit installed may increase the engine’s emissions and decrease fuel economy and performance. Kits should be installed by a qualified mechanic. The kits may be requested from Customer service. See parts list for details.

Altitude Range*

Kit Part Number

Up to 3000 ft

No modification needed

3000-6000 ft

#174

6000-8000 ft**

#175

*Elevation above sea level

**At elevations above 8000 ft, the engine may experience decreased performance

Maintenance

Page 8

For Pump technical questions, please call 1-800-444-3353.

Item 68526 / 68529

For Engine technical questions, please call 1-800-520-0882.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Watt Portable Important Safety Instructions Table of ContentsCarbon Monoxide Hazard Using a generator indoors can Kill Operating PrecautionsSetup Operation Maintenance Safety Setup Operation Maintenance Service Precautions RefuelingSpecifications Safety SetupOperation Maintenance Components and ControlsOFF Grounding High Altitude OperationPeration Altitude Range Kit Part NumberChecking and Filling Fuel Generator Pre-Start ChecksChecking and Filling Engine Oil Using the Generator Starting the Engine Connecting Electrical Loads Safety Setup OperationTo Calculate Wattage EquipmentExample Stopping the Engine in an Emergency Stopping the Engine Under Normal ConditionsCleaning, Maintenance, and Lubrication Hr. of useAir Filter Element Maintenance Checking and Filling FuelEngine Oil Change AintenanceSpark Plug Maintenance Storage10% ethanol E15, E20, E85, etc TroubleshootingDo not use gasoline with more than Setup Use Engine will not start Compression Related sectionParts List Please Read the Following CarefullyAccessories not included provided on request Following parts are only on Item 68526 EPA/CARB versionAintenanceM PerationO EtupS AfetyS EPA/Carb 160For Both Item Numbers Manufacturer’s Warranty Coverage Owner’s Warranty ResponsibilitiesMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

68526 specifications

Harbor Freight Tools is renowned for providing a range of high-quality and affordable tools suitable for both professionals and DIY enthusiasts. One of their popular products is the Harbor Freight Tools 68526, a versatile and powerful portable generator with features that make it an essential addition to any toolkit.

The Harbor Freight Tools 68526 is a 2000 Watt inverter generator that offers clean and stable power, making it perfect for powering sensitive electronics such as laptops, smartphones, and medical devices. Its advanced inverter technology ensures that the power output is similar to that of standard household outlets, reducing the risk of damage to your valuable equipment.

One of the standout characteristics of this generator is its lightweight and compact design. Weighing only around 48 pounds, it is easy to transport and maneuver, making it ideal for camping trips, outdoor events, or emergency home backup. The built-in carrying handle adds to the convenience, allowing users to easily move the generator from one location to another.

The 68526 model features a quiet operation, thanks to its efficient engine design. With a noise level of just 58 dB, it operates quietly, making it suitable for use at night or in noise-sensitive environments. This feature is particularly appreciated at campsites or outdoor gatherings where maintaining a peaceful atmosphere is important.

Equipped with a 1-gallon fuel tank, the 68526 provides a runtime of up to 6 hours at 50% load on a single tank of gas. This extended runtime means that users can rely on the generator for longer periods without the need for frequent refueling, which is a significant advantage during power outages and outdoor activities.

In terms of connectivity, the Harbor Freight Tools 68526 comes with two 120V AC outlets and one 12V DC outlet, allowing users to charge multiple devices simultaneously. Additionally, it includes a USB port which adds versatility, enabling the charging of various electronic devices directly.

To ensure safety and reliability, this generator features an automatic low-oil shutdown mechanism that protects the engine from damage. Users can operate it with peace of mind, knowing that the unit will shut down if the oil level becomes too low.

In summary, the Harbor Freight Tools 68526 is a powerful, portable, and efficient inverter generator that combines advanced technology, user-friendly features, and dependable performance, making it a valuable tool for anyone in need of reliable power on the go. Whether for home use or outdoor adventures, this generator proves to be a dependable companion.
Top Page Image Contents