Gravely 12031303 Upper Frame Assembly Installation, Boot Installation, Top Assembly To The Upper

Page 12

2-8 Upper Frame Assembly Installation

NOTE: During this step, it is suggested that two people install the top frame to the lower frame. Using two people to raise the top frame, lift the top frame above the lower frame making sure the bag frames are located away from the engine as shown in Figure 2-8. Slide the top frame vertical tube into the lower Frame vertical tube aligning the holes. Insert (1) ½” x 2-1/2” clevis pin P#(K0133) through the holes and fasten with

(1) 5/32” x 2-5/8” hair pin clip P#(K0088).

Figure 2-8.

Top Frame

2-10 Boot Installation

First, remove the deflector shield by pulling out the locking pin and lifting the shield out of deck mount tube.

To install the boot to the mower deck, attach the boot plate mount pin P#(B0274) to the boot plate P#(B0285) using (1) 3/8”-16 x 3/4” HHCS P#(K1190) and (1) 3/8”-16 lock washer P#(K0048) See figure 2-10a. Next, loosely fasten the boot P#(E1125) to boot plate using (2) 3/8”-16 x 1” carriage bolts P#(K1182) and (2) 3/8”-16 flange nuts (P#K1215) with the head of the bolts placed from the inside of the boot. Insert the boot plate mount pin into the deck mount tube and slide the slot of the boot plate over the tab at the top of the discharge opening. Place the deflector shield in the transport position on top of the boot plate. Replace the locking pin. Adjust the boot to fit securely against the discharge opening and tighten the

(2) 3/8”-16 flange nuts. See figure 2-10b for clarity.

Figure 2-10a.

(1) 3/8”-16 x 3/8” HHCS

 

(1) 3/8” Lock Washer

Lower Frame

½” x 2-1/2” Clevis Pin

 

5/32” x 2-5/8”

 

Hair Pin Clip

2-9 Top Assembly To The Upper

 

 

Boot Plate

 

Frame Assembly Installation

 

 

Mount Pin

 

 

 

 

 

Align the pivot brackets of the top assembly P#(A0551)

 

 

Boot

 

 

 

Plate

 

to the pivot point on either side of the upper frame

 

 

 

 

 

(2) 3/8”-16 x 1” Carriage Bolts

assembly. Place (1) P#(K0041) fender washer between

 

 

each pivot point (Figure 2-9) and fasten each side by

Figure 2-10b.

(2) 3/8” Flange Nuts

using (1) P#(K1153) 5/16”-18 x 3/4” HHCS and (1)

Boot

Locking

 

 

P#(K1180) 5/16”-18 nyloc nut. When fastening leave nut

 

 

Plate

Pin

slightly loose so that the top can pivot freely.

 

 

 

 

 

 

 

 

Figure 2-9.

Top Assembly Here

 

 

 

 

Fasten Here With 5/16” x 3/4” HHCS 5/16” Nyloc Nut Fender Washer

Boot

Tab

Exhaust Deflector

in Transport Position

 

 

12

Image 12
Contents OPERATOR’S Manual $4.00 REVTable of Contents PTO Grass Collection SystemSafety Safety Alert Symbol Safety SignsPeco Limited Warranty for NEW Products What is WARRANTED?Installation for USE Section Introduction and DescriptionIntroduction DescriptionMuffler Guard Installation Frame Mount Bracket InstallationSafety Interlock Harness Connection Carriage Bolt Exploded Parts View Parts View Belt Installation Lower Frame To Frame Bracket InstallationCam Assembly Adjustment Upper Frame Assembly Installation Boot InstallationTop Assembly To The Upper Frame Assembly InstallationLength Of Hose Adjustment Upper Hose InstallationLower Hose To The Blower Cone Installation Lower Hose To The Boot InstallationBlower Cone Installation Impeller Blade Removal/ReplacementInstallation/Removal Collection BagsSection Maintenance Section Operating InstructionsSection Parts and Service Parts And Service InformationLubrication Safety Decals Page Page Page Ppeco BOX

12031303 specifications

The Gravely 12031303 is a robust and versatile zero-turn mower designed for both residential and commercial use. This mower stands out due to its combination of power, precision, and user-friendly features, making it an excellent choice for professionals and homeowners alike.

One of the primary features of the Gravely 12031303 is its powerful engine. Equipped with a 23 horsepower Kawasaki engine, this mower offers superior performance and reliability. The engine delivers impressive torque, allowing it to tackle thick grass and tough terrain with ease. This power translates into faster mowing times, ensuring that you can cover large areas efficiently.

The cutting deck on the Gravely 12031303 is another highlight, featuring a 48-inch fabricated deck made from heavy-duty materials. This not only ensures durability but also provides excellent cutting performance, resulting in a clean and even finish. The deck comes with adjustable cutting heights, allowing users to customize their mowing experience based on the type of grass and desired appearance.

The zero-turn capability is a game-changer for maneuverability. The dual-lever steering system allows the operator to make quick turns and navigate around obstacles with precision. This is particularly beneficial for those mowing in tight spaces or intricate landscapes, where traditional mowers may struggle.

In terms of comfort, the Gravely 12031303 does not disappoint. It features an ergonomic seat with ample cushioning, providing support during long mowing sessions. The controls are intuitively placed, allowing for easy operation without straining. Additionally, the mower is equipped with a large fuel tank, minimizing the need for frequent refueling and allowing for uninterrupted mowing.

Safety is also a priority with the Gravely 12031303. It comes with features such as a rollover protection system and easy-access controls that enhance operator safety. The mower's construction ensures stability, reducing the risk of tipping on uneven terrain.

In summary, the Gravely 12031303 combines power, durability, and comfort to deliver an exceptional mowing experience. With its powerful engine, quality cutting deck, zero-turn technology, and focus on user comfort and safety, it is a standout choice for anyone looking to achieve pristine lawns efficiently. Whether you're a homeowner with a sizeable yard or a professional landscaper, the Gravely 12031303 is designed to meet your mowing needs effectively.