Gravely 12031303 manual Installation/Removal, Collection Bags

2-18 Installation/Removal Of Figure 2-18b. Plastic Top

Collection Bags

To install the bag onto the bag ring, first make sure the bag ring end caps are fastened to the bag ring. Place the seam openings of the bag onto the bag ring openings and turn the bag until the slot bracket in the bag ring is protruding from the opening in the bag (Figure 2-18a). Do this for each of three bags.

Install the completed assemblies onto the support frame and close the plastic top. Fasten both draw latches to

hold the plastic top closed (Figure 2-18b).

Draw Latches

To empty the bag, remove the bag and bag ring by lifting
and sliding rearward. Grasp the loop on the bottom of
the bag, turn it upside down and empty the collected
debris (Figure 2-18c). Repeat for the other bags.
Reinstall all bags, line with plastic bags if desired, close
the plastic top and reattach the draw latches.	Figure 2-18c.

Plastic lawn and leaf bags, 33 gallon size, may be used inside the cloth bags. Be sure to leave enough plastic bag hanging over the frame so the plastic bags can be twist tied before emptying (Figure 2-18d).

Figure 2-18a.

Bag Ring	Slot
	Bracket

Grasp Bag

Here

Figure 2-18d.

Plastic Bag

Bag Ring	Cloth Bag
End Caps

Cloth Bag

15