Grizzly H8170/H8171 Inventory, Site Considerations, Box Contents Figure Qty, To move the splitter

Page 12

Inventory

After all the parts have been removed from the shipping box you should have the following items:

Box Contents (Figure 4):

Qty

A.

Log Splitter Body

1

B.

Support Leg

1

C. Hardware Bag (Not Shown)

1

 

— Carriage Bolts M8-1.25 x 10

5

 

— Hex Nuts M8-1.25

5

A

B

Figure 4. H8170/H8171 Inventory.

If any nonproprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

NOTICE

Some hardware/fasteners on the inventory list may arrive pre-installed. Check mount- ing locations before assuming that any items from the inventory list are missing.

-10-

Site Considerations

Work Surface

Always use the splitter on a flat, stable work sur- face. Operating your splitter will be easiest when the controls are waist high. At minimum, your work surface must safely support the combined weight of splitter and the heaviest log you intend to split.

Working Clearances

Allow enough room on all sides to move logs to and from the splitter. Refer to the Machine Data Sheet for the dimensions of your splitter.

Moving the Splitter

The wheels on the Model H8170/H8171 make it possible for one person to move it short distances. However, the rugged design of your splitter makes it heavy; we recommend that you get assistance whenever lifting it.

To move the splitter :

1. DISCONNECT THE LOG SPLITTER FROM THE POWER SUPPLY!

2. Close the air bleeder screw by turning it clockwise (viewed from the rear of the split- ter) until it stops. This will prevent hydraulic fluid from leaking out during the move.

3. Grab the front handle and lift until the wheels carry the load of the rear end. You will need to raise the front end about 15" to shift the load to the wheels. Roll the splitter to the desired location and lower the front end.

4. Open the air bleeder screw by turning it clockwise two full turns.

To lift the splitter:

1. Do Steps 1–2, above.

2.Get an assistant to help you to lift the split- ter and carry it to the new worksite; use the handles at each end.

H8170/H8171 Hydraulic/Electric Log Splitter

Page 11 Page 13
Image 12
Page 11 Page 13
Contents HYDRAULIC/ELECTRIC LOG Splitter Page Table of Contents Introduction Foreword Contact InfoH8170/H8171 Hydraulic/Electric Log Splitter Identification Safety Instructions for Machinery H8170/H8171 Hydraulic/Electric Log Splitter Additional Safety Instructions for Hydraulic Log Splitters Do not Attempt to ChangeCircuit Requirements 110V OperationSetup SetUp SafetyItems Needed for Setup UnpackingBox Contents Figure Qty InventorySite Considerations To move the splitterAssembly Test Run Components and Hardware Needed QtyTo attach the support leg To test run the log splitterOperation Safety Overview OperationsBasic Operations Removing a Jammed LogTo split a log To safely remove a jammed logMaintenance CleaningSchedule Checking/Adding Hydraulic FluidChanging Hydraulic Fluid To change the hydraulic fluidSharpening Splitting Wedge Wedge points H8170/H8171 Hydraulic/Electric Log SplitterService TroubleshootingH8170/H8171 Wiring Diagram H8170/H8171 Hydraulic System Schematic H8170 Parts Breakdown Main Assembly H8170 Parts List DescriptionH8171 Parts Breakdown Main Assembly H8171 Parts List H8170/H8171 Parts Breakdown Motor Assembly H8170/H8171 Safety Label Parts List Warranty and Returns Page Page

H8170/H8171 specifications

The Grizzly H8170 and H8171 are two powerful offerings from the renowned Grizzly Industrial brand, well-respected for their robust machinery and tools tailored for woodworking, metalworking, and more. These two models cater to craftsmen and DIY enthusiasts by combining advanced technology with user-friendly features, making them ideal choices for both beginners and seasoned professionals.

One of the distinguishing features of the Grizzly H8170 and H8171 is their high-quality construction. Built with heavy-duty materials, these machines are designed to endure rigorous daily use while maintaining optimal performance. The cast iron tables provide a stable, vibration-free work surface, ensuring precision during operations and enhancing the overall user experience.

In terms of technology, the H8170 and H8171 are equipped with variable speed controls, allowing users to adjust speeds based on the specific application. This flexibility is crucial for achieving the desired finish on different materials. Whether one is working with softwoods or hardwoods, the ability to customize speed settings makes these machines versatile tools for a wide range of projects.

Another significant characteristic of the Grizzly H8170 and H8171 is their compact design, which makes them suitable for workshops with limited space. Despite their small footprint, they offer impressive power and efficiency, making them ideal for both hobbyists and professional woodworkers who may need to transport their tools.

Both models come with safety features that ensure user protection. Emergency stop buttons and clear safety guards are integrated into the design, minimizing the risk of accidents during operation. These features underscore Grizzly’s commitment to providing a safe working environment for all users.

The ease of maintenance is another highlight of these machines. Grizzly has designed the H8170 and H8171 with accessible components, simplifying tasks like blade changes and cleaning. This design consideration means less downtime and more time spent working on projects, which is vital for productivity.

In summary, the Grizzly H8170 and H8171 models stand out due to their durable construction, variable speed technology, compact design, essential safety features, and ease of maintenance. They represent an excellent investment for anyone serious about woodworking or metalworking, providing the reliability and performance needed to tackle various tasks with confidence.
Top Page Image Contents