Grizzly owner manual G0594 Large Chipper/Shredder

Page 12

Figure 5. Positioning the hopper gasket.

4.Place the hopper on top of the gasket and line up all of the holes. Place rubber grom- mets and fender washers on two hex bolts, thread them through the holes nearest the motor and secure them with flat washers, lock washers, and lock nuts.

5.Line up the holes in the toolbox with the remaining holes in the hopper and secure them with the same combination of hex bolts, washers, and lock nuts as used in Step 4 (see Figure 6).

Figure 6. Attaching the hopper and toolbox.

6.Insert a Phillips head screw with a flat washer through each hole in the handles. Place three flat washers on each of the screws and insert the handle assembly into the holes in the hopper (see Figure 7). Secure the handles with a flat washer, lock washer, and lock nut on each screw.

-10-

Figure 7. Installing the handles.

7.Place the funnel over the studs in the side of the chipper/shredder and secure it with the remaining flat washers, lock washers, and lock nuts (see Figure 8).

Figure 8. Funnel installation.

8.Before operating, fill the motor with oil and gas according to the instructions in the Briggs & Stratton manual.

NOTICE

This chipper/shredder does not have oil in the motor when shipped. Add oil before operating the chipper/shredder, or the motor will seize.

G0594 Large Chipper/Shredder

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model G0594 Page Table of Contents Introduction ForewordContact Info Identification Machine Identification Figures 1Safety Safety Instructions for MachineryAlways Lock Mobile Bases if Used Before Operating Machinery Additional Safety Instructions For Chipper/Shredders Turn OFF CHIPPER/SHREDDER Turn Jams and Clogging Turn the chipFeeding Material Hold branches SET UP Set Up SafetyItems Needed for Set Up UnpackingInventoryAssembly Inventory Figure QtyHardware Not Shown Qty To assemble the chipper/shredderG0594 Large Chipper/Shredder Operation Safety Chipping/Shredding OperationsTo operate the chipper/shredder To shred twigs, leaves, and brush Shredding TipsTo chip branches Chipping TipsMaintenance CleaningVisual Inspection StorageService TroubleshootingTo perform this procedure Replacing BladesReplacing V-Belt Tools Needed QtyParts Breakdown Parts List DescriptionWarranty and Returns Briggs & Stratton Engine WarrantyPage Page

G0594 specifications

The Grizzly G0594 is a highly versatile and powerful woodworking tool designed for those who demand precision and efficiency in their projects. This dual drum sander is meticulously engineered to deliver exceptional sanding performance, making it an ideal choice for both hobbyists and professional woodworkers.

At the heart of the G0594 is its robust dual drum design. This feature allows users to sand both sides of their workpieces simultaneously, significantly reducing the time needed to achieve a smooth finish. The two 5-inch diameter drums can accommodate a variety of sanding grits, providing the flexibility needed for different applications. This versatility ensures that users can easily switch between coarse and fine sanding, making it suitable for everything from initial surface preparation to final finishing touches.

Another prominent characteristic of the G0594 is its heavy-duty construction. Built with a solid steel frame and a sturdy cast iron table, this sander boasts exceptional durability, ensuring it remains stable during operation. The large 16-inch by 38-inch table provides ample workspace for sanding larger panels, while its precision-ground surface facilitates accurate and smooth movements.

The G0594 also incorporates advanced technology to enhance user experience. Its variable speed control allows operators to adjust the drum speed according to the specific needs of their project. This control is instrumental in preventing burning or damaging the material being sanded. Additionally, the sander is equipped with a dust collection port, ensuring a cleaner workspace by effectively removing debris and dust generated during the sanding process.

The digital readout on the machine's control panel offers precise measurement of the drum height, allowing for consistent and repeatable results. This feature is particularly advantageous when sanding multiple pieces to the same thickness.

Overall, the Grizzly G0594 provides a perfect blend of power, precision, and efficiency, making it a valuable addition to any woodworking shop. Its impressive features, robust construction, and user-friendly technologies combine to ensure that this dual drum sander can tackle a wide range of sanding tasks with ease and accuracy, delivering flawless results every time. Whether you are working on furniture, cabinetry, or other fine woodworking projects, the G0594 stands out as a tool designed for excellence.
Top Page Image Contents