Specifications
Engine: | GMC FOUR STROKE |
Speed: | |
Fuel Tank Capacity: | 1.5L |
Oil Tank Capacity: | 0.6L |
Width of Cut: | 460mm |
Blades: | 4 |
Height Adjustment: | Single lever, 10 Levels |
| 18mm - 85mm |
Wheel Size: | 150mm (Front) |
| 180mm (Rear) |
Equivalent Spark plugs: | NGK - CR7E |
| NHSP LD - B7RC |
| CHAMPION - RN11YC |
| NHSP LD - F6RTC |
| DENSO - X16EP |
| NHSP LD - D7 |
Weight (GW): | 29kg |
Noise label rating 75dBA (taken at 7.5 meters) you must wear ear protection at all times.
Safety rules for petrol lawn mowers
Training
•Read the instructions carefully. Get familiar with the controls and proper use of the equipment.
•Only use the lawn mower for the purpose for which it was designed, i.e. for cutting and collecting grass. Any other use can be hazardous, causing damage to the machine.
•Never allow children or people unfamiliar with these instructions to use the lawn mower. Local regulations may restrict the age of the operator.
•Never use the lawn mower:
–When people, especially children, or pets are nearby.
–If the operator has taken medicine or substances that can affect his ability to react and concentrate.
•Remember that the operator or user is responsible for accidents or hazards occurring to other people or their property.
Preparation
•While mowing, always wear sturdy footwear and long trousers. Do not operate the equipment when barefoot or wearing open sandals.
•Thoroughly inspect the area where the equipment is to be used and remove all objects which may be thrown by the machine or damage the cutter assembly and the engine (stones, sticks, metal wire, bones, etc.)
•WARNING: DANGER! Engine fuel is highly flammable:
– Store fuel in containers specifically designed for this purpose.
–Refuel using a funnel and outdoors only. Do not smoke while refuelling or whenever handling the fuel.
–Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel while the engine is running or when the engine is hot.
–If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until the fuel has evaporated and the vapour dispersed.
4