Global Machinery Company RL501A Starting the engine, Running the engine, Stopping the engine

Page 11
Cold
Start
Cold
Start

5.Retighten the oil filler cap firmly before starting the engine.

Starting the engine

Note. Before starting the mower check the oil and fuel levels. Warranty will be void if the engine becomes faulty due to insufficient oil and fuel levels.

1. Move the

throttle lever Run

(3) to the cold start position.

2. Disengage the brake by pulling

the brake lever (12) toward the

handle. Letting go of the lever will prevent the mower from starting or will stop the engine, if running.

3.While holding the brake lever inward, pull the recoil starter (9) lightly until you feel resistance then pull quickly until the engine starts. Do not pull the cord with a jerk or release it until fully rewound.

4.Once the lawn mower has started and warmed up move the throttle lever to the either

COLD START POSITION (recommended) or RUN while continuing to hold the brake lever.

Running the engine

Note. If the safety brake is removed, the engine will cut out.

1. Once the engine

Run

warms up, move the throttle to RUN (WORKING) position.

2.Push the throttle to the suitable place, to

achieve the required

Start

 

Cold

rotation speed.

 

Stopping the engine

 

To stop the engine

Run

reduce the speed of the

 

engine by pulling the

 

throttle lever (3) towards

 

the tortoise and release

 

the brake lever (12).

 

In an emergency just

Cold

release the brake lever.

Start

 

Mowing advice

1.It is recommended to use the fast throttle setting and keep the engine running at maximum speed. This will deliver the best cut. If the speed of the engine slows this could indicate the mower is being overloaded, by trying to cut to much grass or the catcher may be full. Try mowing a narrower strip, mowing slower or raise the cutting height.

2.Sharp blades cut cleanly and efficiently, if the blade is dull it will tear the grass. This will result in the ends turning brown. When the blades no longer cut cleanly either sharpen them or replace them.

3.To safely operate the mower ensure all four wheels are on the ground and be careful not to loose your footing or control of the mower. Be very careful when mowing uneven or rough ground. Keep a firm grip on the handle bar at all times, always walk, never run with the mower.

11

Image 11
Contents Stroke Petrol Lawn Mower Contents Environmental protection Description of symbolsIntroduction Preparation SpecificationsSafety rules for petrol lawn mowers TrainingOperation Maintenance and storage Operation safety instructionsUnpacking Contents of cartonKnow your product Attaching the catcher AssemblyAttaching the Handles Assembling the catcherChecking the oil Cutting height adjustmentBrake lever FuellingStopping the engine Mowing adviceStarting the engine Running the engineReplacing the blades MaintenanceEmptying the grass catcher Remove all 4 single blades including the washer and nuts Page Page GMC customer assist