Control panel locking
To avoid modifying a setting of cooking zones , in particular with within the framework of cleaning the control panel can be locked (with exception to the On/Off key [ 0/I ]).
∙ Locking |
|
|
Action | Control panel | Display |
Start | Press key [ 0/I ] | [ 0 ] or [ H ] on displays |
Hob locking | Press key [ ] | [ 0 ] or [ H ] on displays |
|
| Locking light is on |
∙ Unlocking |
|
|
Action | Control panel | Display |
Start | Press key [ 0/I ] | [ 0 ] on displays |
Unlocking the hob | Press key [ ] | [ 0 ] on displays |
|
| Locking light is off |
COOKING ADVICES
Pan quality
Adapted materials : steel, enamelled steel, cast iron, ferromagnetic
Not adapted materials : aluminium and
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles:
∙Put a littler water in a pan placed on an induction heating zone set at level [ 9 ].This water must heat in a few seconds.
∙A magnet stuck on the bottom of the pan.
Some pans can make noise when they are placed on an induction cooking zone. This noise doesn’t mean any failure on the appliance and doesn’t influence the cooking operating.
Pan dimension
The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan. However the bottom of this pan must have a minimum of diameter according to the corresponding cooking zone.
To obtain the best efficiency of your hob, please place the pan well in the center of the cooking zone.
9
