Additional safety rules for edgers

•Ensure the tool is switched off completely before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

•Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

•Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

•Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

•Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

Service

•Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool

is maintained.

Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design:

•Contact with the blade.

•Kickback of the edger due to hidden solid objects.

•Blade fracture.

•Catapulting of blade pieces.

•Damage to hearing if effective earmuffs are not worn.

•Do not use blades that are deformed or cracked.

•Do not operate in a hazardous location. Such areas include where there is a risk of explosion of petrol fumes, leaking gas or explosive dust.

•Do not operate in a confined area. Exhaust gases, smoke or fumes could reach dangerous concentrations.

•Protect your tool. This edger is NOT WEATHERPROOF and should not be exposed to direct sunlight, high ambient temperature and damp, wet or high humidity conditions.

•Do not smoke while refuelling. This is potentially dangerous as it may ignite the fuel and cause an explosion.

•Take care not to spill fuel. When refuelling the edger ensure that the motor has been switched off. Prevent the spilling of fuel as this may also ignite with the hot motor. Never refuel whilst the engine running.

•Be careful where you store the edger. Store the edger in a dry area away from flammable liquids.

•Keep your distance. The edger emits exhaust fumes. Ensure bystanders keep a safe distance.

•Ensure you use oil-mix fuel. Ensure that you mix 40 parts unleaded fuel to 1 part engine grade oil. If not, the engine will overheat and cause damage to your edger.

•Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

•When making any adjustments to the tool always wait for the blade to come to a complete stop and turn off the tool.

•Never attempt to unclog the blade chamber by tapping the tool on the ground, this can damage the unit.

PEDG specifications

Global Machinery Company PEDG has established itself as a notable player in the machinery and equipment industry, catering to a diverse range of sectors, including construction, agriculture, and manufacturing. Founded with the vision of delivering innovative machinery solutions, PEDG has consistently pushed the boundaries of technology and engineering excellence.

One of the main features of PEDG is its commitment to quality and durability. Their machinery is designed to withstand the rigors of demanding environments, which is essential for industries that operate on tight schedules and require reliable equipment. This durability is achieved through the use of high-grade materials and advanced manufacturing processes that ensure each machine can meet the challenges of everyday use.

In terms of technology, PEDG incorporates cutting-edge innovations across its product range. For instance, many of their machines are equipped with state-of-the-art automation and control systems, enabling operators to achieve optimal performance while minimizing the risk of human error. This focus on automation helps to enhance productivity, reduce operational costs, and improve safety within the workplace.

Another noteworthy characteristic of PEDG is its commitment to sustainability. The company has actively sought to develop energy-efficient machinery that reduces emissions and minimizes environmental impact. By utilizing renewable energy sources and designing machines that consume less energy, PEDG aligns itself with global sustainability goals, appealing to environmentally conscious customers.

Furthermore, PEDG emphasizes the importance of customer support and maintenance services. Several products come with extended warranties, and the company offers training programs for operators to ensure they can maximize the potential of their equipment. This comprehensive support system not only fosters customer loyalty but also ensures that the machines operate at peak efficiency throughout their lifecycle.

Overall, Global Machinery Company PEDG continues to be a leader in the machinery sector by focusing on innovation, quality, and sustainability. With a diverse product offering and a strong commitment to customer satisfaction, PEDG is well-positioned to meet the evolving needs of its clients in a competitive marketplace. Through its advanced technologies and robust manufacturing processes, PEDG exemplifies the intersection of performance and responsibility in the machinery industry.