Global Machinery Company PEDG Starting the edger, Stopping the edger, Running in the engine

Page 9

Starting the edger

Choke control

Start position (choke closed).

Run position (choke open).

To start the engine, proceed as follows:

1.Move the ignition switch (3) to the on position marked with an I.

2.Press the primer bulb (14) 6

times until there are no air2

bubbles visible in the fuel discharge line.

Note. This is not necessary if the engine is warm.

3. Push the choke lever (17)

 

up to the start position (the

 

 

choke is now closed).

 

3

Note. Again this is not necessary

 

if the engine is warm.

 

4.Pull the recoil starter (13)until the engine sounds like it wants to run.

5.Push the choke down to the run position.

6. Pull the recoil starter rapidly

4

until the engine starts.

 

7.Allow the engine to run for 10 seconds to let it warm up.

8.To increase the engine speed depress the Lock Off button

(1) on the side of the handle and squeeze the throttle trigger(2).

Stopping the edger

 

4

Stop the engine by pressing the

 

off button (3) to the off position

 

marked 0.

 

Running in the engine

1.During the first ten hours of work, run the engine at a moderate RPM.

2.We advise you in any case not to maintain your engine at a high speed as the different components must settle with each other during the process of running in the engine.

3.It is at the end of the running in period that the engine will reach its maximum power.

4.After the first two hours of work, stop and make sure that all nuts and screws are securely fastened, and tighten them if necessary.

Cutting depth

The cutting depth of the edger can be altered to one of 3 settings 10mm, 20mm and 30mm.

1.To adjust the cutting depth, loosen the Height adjustment

knob approx 5-6 full turns,

2

but do not remove.

 

2.Push the knob fully towards the body of the edger and at the same time move the front wheel arm across to the opposite side of the housing.

3.Raise or lower the arm to the

desired position, and then

3

pull the height adjusting knob

 

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Lawn Edger Contents Read these instructions for use carefully Description of symbolsSafety instructions SpecificationsPersonal safety Power tool use and careService Additional safety rules for edgersUnpacking Contents of cartonKnow your product Assembly FuelingInserting the shaft Stopping the edger Starting the edgerRunning in the engine Cutting depthEdge guide EdgingGuard is fitted with a Landscaping / trenching MaintenanceChanging the Blade BladeProblems Storage and maintenance after usePower loss or sudden stopping of the engine Bad quality cutPage Page Page Save this Manual for future reference

PEDG specifications

Global Machinery Company PEDG has established itself as a notable player in the machinery and equipment industry, catering to a diverse range of sectors, including construction, agriculture, and manufacturing. Founded with the vision of delivering innovative machinery solutions, PEDG has consistently pushed the boundaries of technology and engineering excellence.

One of the main features of PEDG is its commitment to quality and durability. Their machinery is designed to withstand the rigors of demanding environments, which is essential for industries that operate on tight schedules and require reliable equipment. This durability is achieved through the use of high-grade materials and advanced manufacturing processes that ensure each machine can meet the challenges of everyday use.

In terms of technology, PEDG incorporates cutting-edge innovations across its product range. For instance, many of their machines are equipped with state-of-the-art automation and control systems, enabling operators to achieve optimal performance while minimizing the risk of human error. This focus on automation helps to enhance productivity, reduce operational costs, and improve safety within the workplace.

Another noteworthy characteristic of PEDG is its commitment to sustainability. The company has actively sought to develop energy-efficient machinery that reduces emissions and minimizes environmental impact. By utilizing renewable energy sources and designing machines that consume less energy, PEDG aligns itself with global sustainability goals, appealing to environmentally conscious customers.

Furthermore, PEDG emphasizes the importance of customer support and maintenance services. Several products come with extended warranties, and the company offers training programs for operators to ensure they can maximize the potential of their equipment. This comprehensive support system not only fosters customer loyalty but also ensures that the machines operate at peak efficiency throughout their lifecycle.

Overall, Global Machinery Company PEDG continues to be a leader in the machinery sector by focusing on innovation, quality, and sustainability. With a diverse product offering and a strong commitment to customer satisfaction, PEDG is well-positioned to meet the evolving needs of its clients in a competitive marketplace. Through its advanced technologies and robust manufacturing processes, PEDG exemplifies the intersection of performance and responsibility in the machinery industry.
Top Page Image Contents