Global Machinery Company G25 Generator maintenance, Storage, Maintenance schedule

Page 15

If electrolyte gets on your skin, flush with water.

If electrolyte gets in your eyes, flush with water for at least 15 minutes and call a physician immediately.

Electrolyte is poisonous. If swallowed, drink large quantities of water or milk and follow with milk of magnesia or vegetable oil and call a physician.

To prevent the possibility of creating a spark near the battery, connect charging cables first to the battery, then to the generator. Disconnect cables first at the generator.

Note. Never leave the DC plug in the generator when not using the DC for charging batteries. Always remove the DC plug from the socket. In most cases it is acceptable to use both the 12V DC for battery charging and the

AC 240V outlet at the same time. However, when the generator is working close to the maximum load, the generator may go into over load where the AC load will need to be reduced or disconnected.

Generator maintenance

Your generator should be kept clean and dry at all times. The generator should not be stored or operated in environments that includes excessive moisture, dust or any corrosive vapours. If these substances are on the generator, clean with a cloth or soft bristle brush. Do not use a garden hose or anything with water pressure to clean the generator. Water may enter the cooling air slots and could possibly damage the rotor, stator and the internal windings of the generator head.

Storage

If you are going to store your generator for more than 30 days, use the following information as a guide to prepare the generator for storage.

Never store the generator with fuel in the tank indoors or in enclosed, poorly ventilated areas, where fumes can reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer or other gas appliances.

Maintenance schedule

Item

Remarks

Each use

First month

Every 3 months

Every 6 months

Every Year

 

 

 

or 10Hrs

or 50Hrs

or 100Hrs

or 300Hrs

 

 

 

 

 

 

 

Engine oil

Check

 

 

 

 

Change

 

 

 

 

 

 

 

Air cleaner

Check

 

 

 

 

 

 

 

 

 

 

Clean

 

 

• (2)

 

 

 

 

 

 

 

Spark plug

Clean-adust

 

 

 

 

 

 

 

 

 

 

 

Spark arrester

Clean

 

 

 

 

Fuel sediment cup

Clean

 

 

 

 

Valve clearance

Check-adjust

 

 

 

 

• (3)

 

 

 

 

 

 

 

Fuel tank & strainer

Clean

 

 

 

 

• (3)

Fuel line

Check

 

Every 2 Years (Replace if necessary)(3)

 

It is recommended that you keep a log of the hours of operation to determine correct maintenance requirements. Generators that are used in dusty conditions/areas should be serviced more frequently. All servicing should be conducted by an authorized service agent.

15

Image 15
Contents 1000W Inverter Generator Contents Environmental protection Description of symbolsSpecifications IntroductionGeneral safety instructions for power tools Icy, or flooded conditions Hazard What could happen How to prevent itOperation of unit when damaged Operation of generator in rain, wetRisk of fire Object Risk of breathing inhalation hazardRisk from lifting To vehicle surfacesRisk of moving parts Risk of unsafe operationUnpacking Additional safety rules for generatorsKnow your product Checking the engine fuel Inverter technology Including Smart Throttle SystemPreparing the generator Checking the engine oilStarting the engine Fill the unit to the base Filter housing. do not FillAC Applications Connecting apparatus to the generatorOverload Indicator Stopping the engineCharging time Hr DC ApplicationsGenerator maintenance Maintenance scheduleStorage Engine oil replacement Spark plugsAir filter General inspection CleaningRepairs TransportationTroubleshooting Generator stops DC circuit breakerGenerator OverheatingOr stops working Running roughAppliance is not WorkingPage Page Page GMC customer assist