Marantz NR1601 manual Preparation, Speaker Detection Measurement

Page 12

ENGLISH

Set up speakers (Audyssey® Auto Setup)

Preparation

Step 1

Step 2

Speaker Detection

Measurement

 

 

 

 

4 Connect the setup microphone to the SETUP MIC jack of this unit.

•In step 1, you will perform measurements at the main listening position.

•This step automatically checks the speaker configuration and speaker size, and calculates the channel level, distance, and crossover frequency. It also corrects distortion in the listening area.

• In step 2, you will perform measurements at

multiple positions (two to six positions) other than

the main listening position.

• You can achieve a more effective correction of

When the setup microphone is connected, the following screen is displayed.

3-1.Audyssey Auto Setup MultEQ Please place microphone

at ear height at

main listening position.

F.Height : Measure

Front Sp. : A

Amp Assign: Normal

Start

Cancel [ENT]:Select [RTN]:Back

The setting method for 7.1-channel playback using the surround back speakers is described here. For the method of setting up speakers other than the 7.1-channel system, select “Amp Assign” and perform steps 3 and 4 of “Set up speakers” (vpage 33).

5 Use ui to select “Start” and then press ENTER.

When measuring begins, a test tone is output from each speaker.

• Measurement requires several minutes.

If “Cancel” is selected

“Cancel Auto Setup?” is displayed on the TV screen. If “Yes” is selected, “Audyssey Auto Setup” closes.

6 The detected speakers are displayed.

Step1:Speaker Detection

MultEQ

Front Sp. :Yes

Center Sp. :Yes

Subwoofer :Yes

Surround Sp. :Yes

S.Back Sp. :Yes

Next

Retry

[ENT]:Next

NOTE

If a connected speaker is not displayed, the speaker may not be connected correctly. Check the speaker connection.

7 Use ui to select “Next” and then press ENTER.

NOTE

If “Caution” is displayed:

Go to “Error messages” (vpage 10), check any related items, and perform the necessary procedures.

If the problem is resolved, return and restart “Audyssey Auto Setup”.

When performing Audyssey Auto Setup over again

Press ui to select “Retry”, and then press

ENTER.

When measuring has stopped

Press ui to select “Cancel”, then press ENTER. Press o p to select “Yes”, then press ENTER.

Setting up the speakers again

Repeat the operation from step 4 of Preparation .

distortion within the listening area by performing

measurements at multiple positions.

8 Move the setup microphone to position 2, use ui to select “Next”, and then press ENTER.

The measurement of the second position starts. Measurements can be made in up to six positions.

Step2:Measurement

MultEQ Please place microphone at ear height at

2nd listening position.

Next

Calculate

Cancel

[ENT]:Next

If you want to omit measurements from the next position onward, select “Calculate”.

(Go to Step 3 Calculating )

9 Repeatto 6. step 8, measuring positions 3

When measurement of position 6 is completed, a “All the measurements were finished.” message is displayed.

Step2:Measurement

MultEQ

All the measurements were finished.

Calculate

Retry

Cancel

[ENT]:Calculate

8

Remote control operation

Move the cursor

Confirm the setting

Return to previous menu

buttons

(Up/Down/Left/Right)

 

 

Page 11 Page 13
Image 12
Page 11 Page 13
Contents NR1601 Page Product Important Notice do not Modify this ProductFor Canadian customers Avertissements Advertencias Accessories Getting startedAbout this manual Features Set up speakers Audyssey Auto Setup VpagePreparation Speaker Measurement Calculating Check Store DetectionConnecting the speaker cables SpeakersSpeaker terminals Impedance Blu-ray Disc player and TV Blu-ray Disc playerPower on Turn On the TV and subwoofer PowerAbout setup microphone placement Set up the subwooferPress AMP About the main listening position *MPreparation Speaker Detection MeasurementNn When turning Dynamic Volume on Nn When turning Dynamic Volume offStore Finish Retrieving Audyssey Auto Setup settings Examples Error details MeasuresPress Return Distance CheckWhen power is switched to standby Adjust the sound volumeSet the listening mode GPower indicator status in standby modeHBasic version Connections Important informationOutput Monitor OUTConnecting an HDMI-compatible device About Content Type Connecting to a device equipped with a DVI-D connectorNnSettings related to Hdmi connections Hdmi Setup vpageConnecting a TV DVD playerInput Assign vpage Connecting a set-top box Satellite tuner/cable TV Connecting a portable audio playerConnecting an iPod or USB memory device to the USB Port Supported iPod ModelsIPod USB memory Device Connecting a CD player Connecting other audio devicesOptical cable CD player Other audio devicesConnecting an antenna Connecting a wireless receiver RX101Adjusting the master volume Playback Basic operationSelecting the input source Turning off the sound temporarilyPlaying a Blu-ray Disc player/DVD player Playing a CD playerPlaying an iPod Listening to music on an iPodPlaying a USB memory device Important informationPlaying files stored on USB memory devices NnUSB memory devicesTuning in radio stations NnPresetting radio stations Manual presetDefault settings NnDirect frequency tuningSwitching the tuning increment NnTuner FM/AM operationPress o p Selecting a listening mode Surround mode Listening modeMulti-channel playback NnSurround playback of 2-channel sourcesDisplaying the currently playing surround mode Input signal Surround mode DisplayGViews on the displayH Dolby Virtual Speaker mode Dolby Headphone modeStereo playback Direct playbackAdvanced version Install When 7.1ch Front height speaker installedWhen 5.1ch installed When 6.1ch Surround back speaker installedConnect Channel Front height speaker connectionChannel Surround back speaker connection For speaker impedance and speaker cable connections, seeFront A/B connection Bi-amp connectionChannel connection Channel/2-channel connectionSet up speakers Set up F. HeightSet up Amp Assign Set up Front.SpConnecting the remote control jacks NnSettingConnections Advanced connection NnConnectionNn Adjusting the volume of the speakers vpage Playback Advanced operationConvenient functions Hdmi control functionSleep timer function Adjusting the volume of the speakersTo cancel the sleep timer NnAdjusting the volume of groups of speakers Fader functionHow to make detailed settings Menu mapItems that only need to be set Once DAXDisplay when changing settings Display when resettingExamples of on-screen display and front display Top menu displayInputting characters Normal screenKeyboard screen Input Setup Menu operationPress SEARCH/INFO while a normal screen is displayed Select a character to be input with uio p then press EnterAuto Preset Preset SkipItems that can be set with the Input Setup procedure NnAbout the display of input sourcesPreset Name Input AssignInput assignments menu operations Examples of input assign menu screen displaysInput Mode Playback Mode RenameSource Level BD DVD Game AUX1Audio Adjust Items that can be set with the Audio Adjust procedureAudyssey Settings vpage Manual EQ vpage Audio Delay vpageAudyssey Settings Setting items Setting details Height GainSetting items Setting details MultEQ ToneSetting items Setting details Dynamic EQ Setting items Setting details Dynamic VolumeAudio Delay Manual Setup Items that can be set with the Manual Setup procedureSetting items Setting details Speaker Config Setting items Setting details Bass Setting80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz DistanceHdmi Setup Option Setup Audio SetupInformation Other settings Remote control settingsSwitching the on-screen display output mode NnDisabling the sensor function of the remote controlOperating the connected devices by remote control unit Registering preset codesNnDefault settings for preset codes Operating AV equipmentNnResetting the code NnProgramming with the 4-digit codeNnScanning the code table NnChecking the codeSwitch the input source vpage Operate the component Operating componentsNnCD player / CD recorder operation NnTV operationOperating learn mode NnLearning procedureSetting the back light Erasing the all sourcesNnDisabling the backlight NnTurning the backlight onInformation Part names and functions Front panelDisplay W2W1 Q9Q8Rear panel Q2 Q1 Q0Q0FLASHER in jack Remote control unit Q5 R4Operating range of the remote control unit Inserting the batteriesOther information Trademark informationSymbols in the table SurroundSurround modes and surround parameters Surround NnTypes of input signals, and corresponding surround modes This indicates the selectable surround modeInput signal types and formats Explanation of terms A2DPDTS DTS-HD HdcpTroubleshooting GGeneralHGVideoH GAudioHGhdmih GRadioHGiPodH GM-XPortHSpecifications Resetting the microprocessorIndex VvS VvTVvV VvWPreset Code Device select BDDevice select CD Page 06/2010 541110480028M
Related manuals
Manual 84 pages 1.84 Kb

NR1601 specifications

The Marantz NR1601 is a slimline AV receiver that exemplifies high-quality audio processing in a compact form. Designed for those who prioritize space without sacrificing sound quality, the NR1601 offers a variety of features that cater to modern home entertainment needs.

One of the standout characteristics of the NR1601 is its 5.1-channel surround sound capability, delivering robust and immersive audio experiences. It supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for both movie enthusiasts and music lovers alike. With a power output of 50 watts per channel, the receiver efficiently drives a wide range of speakers, ensuring dynamic sound reproduction.

The NR1601 is equipped with several advanced technologies, including Marantz’s proprietary HDAM (Hyper-Dynamic Amplification Module) technology. This ensures high-quality audio playback by minimizing distortion and delivering excellent transient response. Furthermore, the receiver's built-in Audyssey MultEQ technology automatically calibrates the audio output to suit the specific characteristics of your room, optimizing sound quality irrespective of the environment.

Connectivity is another strong suit of the NR1601. It features multiple HDMI inputs (including HDMI 1.4a support), enabling seamless connectivity to various devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports 3D pass-through and 4K video upscaling, ensuring compatibility with the latest video formats and technologies. With support for audio streaming, the NR1601 offers built-in AirPlay, allowing users to stream music directly from their Apple devices.

The NR1601’s user-friendly interface, combined with a clear on-screen display, makes setup and operation a breeze. Additionally, the receiver's low-profile design allows it to fit easily into any AV cabinet, making it an attractive solution for those with limited space.

In conclusion, the Marantz NR1601 is a feature-rich receiver that combines high-performance audio processing, advanced technologies, and versatile connectivity options. It represents an ideal solution for anyone looking to enhance their home theater experience while maintaining a sleek and elegant design. Its commitment to quality and ease of use sets it apart in the realm of compact audio/video receivers.
Top Page Image Contents