Marantz NR1601 manual Input Mode

SVENSKA

NEDERLANDS

Setting items

Setting details

Component

Comp1/Comp2/Comp3 (Component video)

Set this to change the

None : Do not assign a component video input connector to the selected

component video input

input source.

connectors assigned to the

input sources.

• At time of purchase, the settings of the different input sources are as

shown below.

BD

DVD

SAT

Input

GAME

AUX1

TV

BD

DVD

SAT

GAME

AUX1

TV

source

Default

Component

Component

Component

None

None

None

setting

1

2

3

An input source to which an component video input connector cannot

be assigned is displayed as “–”.

Default

Yes : Reset to the defaults.

The “Input Assign” settings

No : Do not reset to the defaults.

are returned to the default

If you select “Default” and press ENTER, the message “Default

settings.

Setting?” is displayed. Select “Yes” or “No”, and then press ENTER.

Video

Default settings are underlined.

Set the source video.

zz“BD”, “TV” or “GAME” can be set when “HDMI” (vpage 42) or “Component” (vpage 43) has been assigned.

Setting items	Setting details
Video Select	Source : Play the picture and sound of the input source.
Video of another input	BD / DVD / SAT : Select video input source to view. This can be set for
source is played back	individual input sources.
combined with the playing	“BD”, “TV” and “GAME” can be selected only when a component
audio.
	video connector is assigned as an input source.

NOTE

•It is not possible to select HDMI input signals.

•Input sources for which “Delete” is selected at “Source Delete”

(vpage 52) cannot be selected.

Buttons on the remote control unit can be used for operations.

Press V.SEL until the desired picture appears.

• To cancel, press V.SEL to select “Source”.

	ESPAÑOL				ITALIANO		FRANÇAIS	DEUTSCH	ENGLISH
									Input Setup
		Setting items						Setting details
	Video Mode					Auto : Process video automatically based on the HDMI content
	Make settings for video					information.
	processing.					Movie : Process video normally.
						Game : Always process video appropriate for game content.
	BD		DVD	SAT
	GAME		AUX1	TV		• This can be assigned to HDMI terminal in “Input Assign” in the menu.
						• If “Video Mode” is set to “Auto”, the mode is switched according to the
						input contents.
Input Mode								Default settings are underlined.
The input modes available for selection may vary depending on the input source.
		Setting items						Setting details
	Input Mode					Auto : Automatically detect input signal and perform playback.
	Set the audio input modes					HDMI : Play only signals from HDMI input.
	for the different input					Digital : Play only signals from digital input.
	sources.					Analog : Play only signals from analog input.

•“HDMI” can be set for input sources for which “HDMI” is assigned at “Input Assign” (vpage 42).

•“Digital” can be set for input sources for which “Digital” is assigned at “Input Assign” (vpage 42).

•If the input source is set to “TV” or “Game”, it cannot be set to “Analog”.

•When digital signals are properly input, the indicator lights on

the display. If the indicator does not light, check the digital input connector assignment and the connections.

•If “HDMI Control” is set to “ON” and a TV compatible with the ARC is connected via the HDMI MONITOR connectors, the input mode whose input source is “TV” is fixed to ARC.

This can also be set by pressing A/D on the remote control unit.

Each time A/D is pressed, the setting is changed as shown below.

Auto HDMI Digital Analog

Simple version

Basic version

Advanced version

Information

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu	43
buttons	(Up/Down/Left/Right)