Marantz SR6009 owner manual Select Start, then press Enter, Channel Select

Page 182

Contents

Connections

Playback

Settings

Tips

Appendix

 

 

 

 

 

 

3Connect the Sound calibration microphone to the SETUP MIC jack of this unit.

When the Sound calibration microphone is connected, the following screen is displayed.

4Select “Start”, then press ENTER.

Audyssey® Setup can also make the following settings. 0 Amp Assign

The signals output from the SURROUND BACK and FRONT HEIGHT/WIDE speaker terminals can be switched in accordance with your speaker environment. (“Amp Assign” (v p. 189))

0 Channel Select

If channels that are not to be used are set in advance, measurement for the set channels is skipped, and measuring time can be reduced. You can also change the number of surround back speakers and subwoofer.

5Follow the instructions on the screen display and press “Next” to proceed further.

Audyssey Setup

Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone and microphone stand.

Set the following items if necessary.

Amp Assign

Channel Select

Check Results

Restore...

Start

Front panel

Display

Rear panel

182

Remote

Index

Page 181 Page 183
Image 182
Page 181 Page 183
Contents SR6009 Connections Playing an iPod Listening to music on a Bluetooth deviceBasic operation Playing a USB memory deviceViewing photographs on the Flickr site Listening to Internet RadioPlaying back files stored on a PC and NAS AirPlay function 101Hdmi control function 130 Selecting a sound mode 116Sleep timer function 131 Smart select function 133Limiting the operating zone with the remote control 215 Speakers 179 Audyssey SetupManual Setup 189 Inputs 175Tips 217 Troubleshooting 219 Resetting factory settings 237 251FM indoor antenna AccessoriesCable labels RC025SRPut the rear cover back on Operating range of the remote control unitInserting the batteries R03/AAA batteriesHigh performance FeaturesHigh quality sound 8In /Out2 Equipped with Hdmi ZONE2 output v pPlayback of DSD and Flac files via USB and networks Energy-saving design Easy operationMulti-Room audio v p Part names and functions Front panelRemote control sensor Power operation buttonPower indicator Volume knobWith the door open AUX1-HDMI connector Headphones jack PhonesSetup MIC jack AUX1 Input connectorsStandard display Volume indicator Input source indicatorDisplay Tuner displayThis lights when the sleep mode is selected. v p Sleep timer indicatorZONE2 power on display Rear panel LQ2 MQ3 Q4N Q5O PQ6RS-232C connector Flasher in jack Bluetooth/wireless LAN antenna connectorsDigital audio connectors Digital Audio Network connectorHdmi connectors Remote Control jacksVideo connectors Video Analog audio connectors AudioRemote control unit Remote control signal transmitter Tuning up / Tuning down buttons Tune +Sound Mode buttons System buttonsVolume buttons df Power buttonECO Mode button G Setup buttonContents Cables used for connectionsFL/FR Front Connecting speakersSpeaker installation FHL/FHR FrontFront Speaker Point slightly Front wide GViewed from the side HSurround Z1 Recommended for Dolby Pro Logic gzZ122 30 z290 110 z3135 Z122 30 z222 45 z390Z122 30 z2120 When 5.1-channel speakers are installedZ1 22 30 z2 55 60 z3 90 Speaker connection 4ohmsTurn the speaker terminal counterclockwise to loosen it Connecting the speaker cablesConnecting the subwoofer How to attach the speaker cable label H Speaker terminalsChannel Not used Speaker configuration and Amp Assign settingsPlayback speaker and zone Amp Assign settings Connection Channel + front speaker of second unit Not used Front BStandard configuration and connection n 5.1-channel Channel surround back Channel front height Channel front wide SR SL Channel + front speaker of second unit Channel Main Zone + 2-channel ZONE2 Connecting an external power amplifier Subwoofer Power amplifiers Primary SecondaryConnecting a TV Hdmi ARC OUT Optical Hdmi Connection 3 TV equipped without an Hdmi connector Connecting a playback device Connecting a DVD player or Blu-ray Disc player Connecting a set-top box Satellite tuner/cable TV Connecting a video camcorder or game console Connecting a turntable Connecting a device with a multi-channel output connector External decoder etcConnecting an iPod or USB memory device to the USB port USB memory Device IPodSupported iPod/iPhone models IPod classic IPod nano IPod touch IPhoneConnecting an FM/AM antenna BlackSuspending on a wall Using the AM loop antennaAM loop antenna assembly Standing aloneConnecting to a home network LAN Wired LANWireless LAN Router with access pointRemotely connecting Marantz devices Connecting an external control deviceRemote Control jacks DC OUT jacks DC/150 mA trigger-compatible deviceConnecting the power cord Contents Basic operation Playback a deviceBasic operation Turning the power onPress Power X to turn on power to the unit Selecting the input sourceTurning off the sound temporarily Muting Adjusting the volumePlayback a DVD player/Blu-ray Disc player Surround playback v pPlaying an iPod BackOperations accessible through the option menu Listening to music on an iPodSelect iPod Browse Mode, then press Enter IPod Browse Mode settingsPress Option when the input source is iPod/USB Use o p to select On-Screen, then press EnterOperations accessible through the option menu Performing random playback Press Option with iPod Browse Mode set to On- ScreenPerforming repeat playback Press EnterPlaying a USB memory device MP3Playing files stored on USB memory devices Operations accessible through the option menu Listening to music on a Bluetooth device EnterPairing with a Bluetooth device Press Bluetooth to switch the input source to BluetoothControl of this unit Playing a Bluetooth deviceStart playing the Bluetooth device Operation buttons FunctionOperations accessible through the option menu Use ui to select Pairing Mode, then press Enter Pairing with the Pairing ModePress Option when the input source is Bluetooth Pair a Bluetooth device with this unitListening to FM/AM broadcasts CH/PAGE dfUse ui to select FM/AM, then press Enter Listening to FM/AM broadcastsPress Option TV screen HOperations accessible through the option menu Tuning in by entering the frequency Direct Tune RDS searchPTY search begins automatically PTY searchUse ui to select PTY Search, then press Enter Use ui to select TP Search, then press Enter Press Enter TP searchRadio Text Auto Changing the tune mode Tune ModeUse ui to select Auto Preset Memory, then press Use ui to select Preset Memory, then press Enter Presetting the current broadcast station Preset MemoryListening to preset stations Use CH/PAGE df to select the desired preset channelUse ui to select a name label, then press Enter Specify a name for the preset broadcast station Preset NameUse ui to select Preset Name, then press Enter Enter the characters, then press OKPreset Skip screen is displayed Skipping preset broadcast stations Preset SkipUse ui to select Preset Skip, then press Enter To set the stations you want to skip by groupsCancelling Preset Skip Skip is cancelledListening to Internet Radio Enter BackUse uio p to select Internet Radio, then press Listening to Internet RadioPress Online Music Press Internet Radio Playing the last played Internet Radio stationUse ui p to select the station, then press Enter Playback / StopUsing vTuner to add Internet Radio stations to favorites Check the MAC address of this unit. Information v pPlaying back files stored on a PC and NAS When using Windows Media Player Applying media sharing settingsWhen using Windows Media Player 12 Windows 7 / Windows Sharing media stored in NASPlaying back files stored on a PC NASOperations accessible through the option menu Viewing photographs on the Flickr site After inputting the Contact, press OK Viewing photographs shared by particular usersUse ui to select Add Flickr Contact, then press Use ui to select the folder, then press Enter Use ui p to select the photograph, then press EnterViewing all photographs on Flickr AirPlay function Play the song on your iPhone, iPod touch or iPad Playing songs from your iPhone, iPod touch or iPadPlaying iTunes music with this unit Tap the AirPlay iconSelecting multiple speakers devices Spotify App Spotify Connect functionPlaying Spotify music with this unit Convenience functions Online MusicSupported input sources USB / Media Server / Bluetooth While content is playing, press OptionRegistering to Favorites Playing back content added to the Save to FavoritesUse ui to select the content you want to play, then Use ui to select Save to Favorites, then pressWhile the content is playing, press Option Deleting content added to favoritesSearching content with keywords Text Search Use ui to select Remove from Favorites, then pressPlay back a still picture Use ui to select Slideshow, then press EnterUse ui to select Slideshow Interval, then press Setting the Slideshow IntervalWhile the list is displayed, press Option Use o p to set the display timeDB +12.0 dB Default 0.0 dB Use ui to select Channel Level Adjust, then pressChannel level adjust screen is displayed Use ui to select Tone, then press Enter Adjusting the tone ToneUse o p to adjust the tone, then press Enter Use o p to set the tone control function to on/offPress Option during audio playback Vivid Press Option during video playbackMovie ISF DayDuring playback in All Zone Stereo mode, press Stopping the All Zone Stereo modePlaying the same music in all zones All Zone Stereo Selecting a sound mode Pure GamePress MOVIE, Music or Game to select a sound mode Selecting a sound modeSwitching the sound mode Press Pure to select Direct Direct playbackPure Direct playback Press Pure to select Pure DirectAuto surround playback begins Auto surround playbackPress Pure to select Auto Description of sound mode types Dolby sound mode Sound mode type DescriptionSources as a maximum of 7.1-channel surround sound DTS sound mode Sound mode type DescriptionDTS NeoX 122 Original sound mode Sound mode type Description Auto sound mode Sound mode type DescriptionDirect sound mode Sound mode type Description Sound mode that can be selected for each input signal Movie Music Game126 127 128 Case of the Dolby Digital Plus decoder, Y is displayed Views on the displayShows a decoder to be used Shows a decoder that creates sound outputHdmi control function Setting procedureEnable the Hdmi control function of this unit Set Hdmi Control to On. v pSleep timer function SleepChecking the remaining time Using the sleep timerTo cancel the sleep timer Press Sleep and display the time you want to setSmart select function Smart SelectPress Main or ZONE2 to select the operating zone with Calling up the settingsRemote control Press Smart SelectChanging the Smart Select Name Changing the settingsSet the items below to the settings you want to register Controlling the unit from a web control Switch the IP Control setting to Always OnWeb control function Check the IP address of this unit with InformationEnterbox. the IP address of this unit in browser’s address Disabling all button operations except Panel lock functionDisabling all key button operations Panel lock function is canceled Canceling the Panel lock functionCurrently set mode Enabling the remote sensor function Disabling the sensor function of the remote control unitRemote lock function CH +Playback in ZONE2 Separate room Connecting ZONE2Connection 1 Connection through the Hdmi ZONE2 connector Connection 3 Connection using an external amplifier Power amplifierPlayback in ZONE2 Press Power X to turn on the ZONE2 powerZONE2 power indicator on the display lights ZONE2 button lightsAdjusting the volume Turning off the sound temporarily MutingMenu map 202 Service technician or custom installation professionalInformation Displays network information 197 Connection 203Speaker Calibration Network Setup Input Setup ECOMain button lights Press SetupMenu operations Menu is displayed on the TV screenInputting characters Select a character to be input with uio p then press Using the keyboard screenDisplay the screen for inputting characters GExampleH Source Rename screenAudio Dialog Level AdjustSubwoofer Level Adjust Loudness Management Off Cinema EQ is not used DefaultSurround Parameter Cinema EQCenter Gain Dynamic CompressionLow Frequency Effects PanoramaDefault Standard sound volume High DimensionLow Reduce the front height channel volume Normal Height GainSubwoofer Set DefaultsSpeaker Select Subwoofer is usedMode LowAudio Delay VolumeReference AudysseyMultEQ XT BypassDynamic EQ Reference Level OffsetHeavy Dynamic VolumeAudyssey DSX MediumStage Height Graphic EQStage Width Graphic EQCurve Copy Adjust EQSpeaker Selection Video Picture AdjustPicture Mode Saturation ContrastBrightness Enhancer Hdmi SetupNoise Reduction Auto Lip SyncHdmi Audio Out Hdmi Pass ThroughPass Through Source Off Do not use Hdmi control function DefaultHdmi Control Use Hdmi control functionVideo TV Audio SwitchingPower Off Control Game Output SettingsVideo Mode Video Conversion P ScalerOff Do not use i/p scaler function ResolutionUse i/p scaler function 480p/576pAspect Ratio Progressive Mode169 Output at 169 aspect ratio Default Video and FilmInfo VolumeOn Screen Display Now PlayingSelect PAL output TV FormatFormat Select Ntsc outputBlu-ray Game Media Player TV Audio InputsInput Assign FrontAnalog HdmiDigital VideoSource Rename Show Use this source Default Hide Do not use this sourceDB +12 dB Default 0 dB Hide SourcesInput Select Input ModeDecode Mode DigitalAudyssey Setup SpeakersAbout the main listening position Finish Procedure for speaker settings Audyssey SetupCheck Channel Select Start the measurement of the first position Measurement requires several minutesStopping Audyssey Setup 185 186 There is too much noise in the room Error messagesExamples Error details Measures Check the polarity of the displayed speakerRetrieving Audyssey Setup settings Amp Assign Manual SetupAssign Mode Main SpeakersSurround Speaker ConfigFront CenterFront Wide Surr. BackFront Height SpkrsStep DistancesUnit Set the distanceTest Tone Start Levels settings are returned to the default settingsLevels Individual CrossoversSet the crossover frequency LPF for LFE Subwoofer ModeBass LFE+MainFront speaker a is used Set the front speaker A/B to use for every sound modeFront Speaker Front speaker B is usedInformation Connect UsingNetwork ConnectionUse iOS Device Wi-Fi SetupScan Networks Manual PasswordWPS Router SecuritySettings Port IP ControlProxy Off In StandbyDiagnostics Friendly NameMaintenance Mode Language ECO ModeGeneral Auto Standby Power On DefaultOn Screen Display ZONE2 Setup Power On Volume Volume LevelVolume Limit 60 -20 dB / 70 -10 dB / 80 0 dB Default 70 -10 dBSmart Select Names Activate trigger on this modeZone Rename Trigger OutAudio Front DisplayDimmer FormatFirmware NotificationsZone Usage Data Firmware UpdateUpdate Check forStatus Upgrade Add New FeatureUpgrade Display the items to be upgraded Package Off Turn protection off Default Setup LockProtect settings from inadvertent changes LockPress and hold ZONE2 and Setup Limiting the operating zone with the remote controlCanceling the settings One Want the volume not to become too loud by mistake 217218 Want to combine a desired video with the current music 218Want to have the subwoofer always output audio Want the volume not to become too loud by mistakeTips Want to make human voices in the movies clearerWant to combine a desired video with the current music Want to delete unused input sourcesTroubleshooting If a problem should arise, first check the following205 Power does not turn on / Power is turned offSymptom Cause / Solution 263Display on this unit shows nothing No sound comes out Desired sound does not come out 224 Sound is interrupted or noise occurs No video is shown on the TV 227 Menu screen is not displayed on the TV IPod cannot be played back 243 USB memory devices cannot be played backNo connection is Device cannot be playedBluetooth cannot be played back 246 Internet radio cannot be played backList of broadcasting Various online services cannot be played Music files on PC or NAS cannot be played backHdmi control function does not work 199 Cannot connect to a wireless LAN networkCannot connect to Points236 Resetting factory settings DAX ZONE2 SourceAbout Hdmi Hdmi Control Auto Lip SyncHdmi Pass Through ARC Audio Return ChannelChannel 5.1-channel, 2.8224 MHz Supported video signalsSupported audio formats Copyright protection systemVideo signal Video conversion functionInput signal Output signal Bit rate Playing back a USB memory devicesCompatible formats Maximum number of playable files and folder Playing back a Bluetooth deviceAbout Bluetooth communications Media USB memory deviceSpecifications of supported files Playing back a file saved on a PC or NASPersonal memory plus function Playable broadcast station specificationsPlaying back Internet Radio Last function memorySound modes and channel output Sound modes and surround parameters 249 250 Types of input signals, and corresponding sound modes 252 253 Explanation of terms AudysseyDolby Dolby TrueHD DTSDolby Pro Logic gz DTS 96/24DTS-ES Matrix DTS-HD High Resolution AudioDTS-ES Discrete DTS ExpressMP3 Mpeg Audio Layer-3 Alac Apple Lossless Audio CodecFlac Free Lossless Audio Codec Sampling frequency Mpeg Moving Picture Experts Group, MPEG-2, MPEG-4WMA Windows Media Audio Speaker impedanceAES Advanced Encryption Standard NetworkProgressive sequential scanning AirPlayWPA2 Wi-Fi Protected Access Wi-FiWPA Wi-Fi Protected Access WPS Wi-Fi Protected SetupModem Media playerNetwork Names Ssid Security Set Identifier ITunesOthers Room where this unit is placed is called the Main ZonePairing App StoreTrademark information 265 Specifications Audio sectionPhono equalizer Input sensitivity Riaa deviation Digital OutputDigital input Distortion factorVideo section Tuner sectionNo. of channels Wireless LAN sectionRadio frequency Bluetooth section GeneralDimensions Unit mm Index Numerics251 Pairing a Bluetooth deviceSound mode 149219 170Expat LicenseBoost FastDelegate276 277 Tremolo LiboggLibvorbis Tremor OMersenne TwisterAres ZlibCURL License information for the software used in the unit Holdings Inc 10353 01AM
Related manuals
Manual 12 pages 30.23 Kb

SR6009 specifications

The Marantz SR6009 is a high-performance AV receiver that has garnered attention for its robust features and exceptional audio quality. Designed for both audiophiles and home theater enthusiasts, it blends advanced technology with user-friendly operation, making it a versatile choice for various entertainment setups.

At its core, the SR6009 packs a powerful 9.2-channel amplifier, delivering an impressive output power of 110 watts per channel. This capability allows it to drive multiple high-quality speakers, creating an immersive surround sound experience. The addition of dual subwoofer outputs enhances the low-frequency response, providing a more profound audio experience for movie lovers and music enthusiasts alike.

One of the standout features of the SR6009 is its support for numerous surround sound formats. It is fully compatible with Dolby TrueHD and DTS-HD Master Audio, allowing users to enjoy high-definition audio that matches the cinema-quality experience. Moreover, the receiver is equipped with advanced Audyssey MultEQ XT technology, which optimizes speaker performance by automatically calibrating sound based on room acoustics, ensuring consistent audio playback across different listening environments.

In terms of connectivity, the Marantz SR6009 is well-equipped with seven HDMI inputs and two outputs. This makes it easy to connect multiple devices such as Blu-ray players, gaming consoles, and streaming devices, all while supporting the latest 4K video formats, including HDCP 2.2 pass-through. Alongside HDMI, the receiver also features various analog and digital inputs, allowing for diverse connectivity options to suit different needs.

Streaming music is made easy with built-in Wi-Fi and Bluetooth capabilities, along with support for popular services such as Spotify, Pandora, and Apple AirPlay. The SR6009 also supports DLNA 1.5, enabling users to stream audio files from their home network effortlessly.

Another notable characteristic of the SR6009 is its intuitive user interface, which includes an on-screen display for easy navigation. The receiver comes with a remote control, but users can also control it via a mobile app, enhancing the overall accessibility of features.

Overall, the Marantz SR6009 stands out for its blend of power, versatility, and cutting-edge technology. With its capacity to deliver stunning audio and video performance, it remains an excellent choice for anyone looking to enhance their home entertainment system.
Top Page Image Contents