Flowtron Outdoor Products MT-200 Series, MT-300 Series manual Octenol Cartridge, Maintenance

Page 7

Octenol Cartridge

U.S. Government and university researchers have demonstrated thatoctenol combined withcarbon

d i ox i d e (both components of respiration) are irresistible attractants to mosquitoes.

The Flowtron Mosquito PowerTrap uses a specially designed time release cartridge containing o c t e n o l (1 - OCTEN - 3 - OL) .

To Install the Octenol Cartridge:

3 . Empty the catch tray periodically to ensure proper air flow through the trap. To remove the catch tray push in on the latch at the front of the catch tray and pull tray down.

4 . Remove and clean the screen-lined funnel each time the propane tank is refilled or more often dur- ing periods of heavy infestation. To remove funnel, proceed as follows:

Switch unit off and allow it to cool. Remove catch tray.

1.Remove the octenol cartridge from the sealed pouch and peel the protective cover from the face of the cartridge. Avoid touching the openings in the cartridge and always wash hands thoroughly after contact .

2 . Place the cartridge in the rectangle slot located at the bottom of the plenum. Insert the cartridge with the openings facing inward. See Illustration 5.

Plenum

 

 

Cartridge

Slot

Shown in

Place

Octenol

Insert

Cartridge

Cartridge

Illustration 5

Push rear of bottom funnel ring up into the unit’s hous- ing until front tabs become disengaged from housing. See figure A .

Pull funnel down and for- ward releasing rear sec- tion of upper funnel ring and remove funnel from unit. See figureB .

Remove insect debris from screen surrounding funnel. Wash screen with water and shake off excess water before re- installing .

Re-install funnel by hold- ing funnel at a slight angle and insert the front edge of the upper funnel ring inside of unit’s hous- ing. See figure C.

Figure A

 

Housing

 

Up

Bottom

Front

Tab

Funnel

Ring

Push Up Here

 

Figure B

Down

Forward

Upper

FunnelTabs

Ring

Figure C

Maintenance

1 . Refill your propane tank as required. The green timed mode lights on the control panel will flash when a new supply of propane is needed.

2 . Replace the octenol cartridge after 450 hours of operation .

N OT E : The following table may be used as a general guide to determine approximate pro p a n e r e fill times.

Operating Mode

Refill Times

Hours per Day

(20 lb propane tank)

3

. . . hours

6

– 7 months

3 + 2

. . . hours

3

– 4 months

4 + 3

. . . hours

2

– 3 months

24

. . . . hours

3

– 4 weeks

 

 

 

 

 

Front

Up

Push funnel upwards and

Edge

of Upper

 

with the rear section of

Funnel Ring

 

the bottom funnel ring at

 

 

a slight angle compress

 

 

Figure D

 

funnel until front tabs of

 

 

 

bottom funnel ring are up

 

 

inside of the housing. See

 

 

figure D.

 

Up

Release funnel and it will

 

 

spring into place.

 

 

 

 

Replace catch tray and re-start unit.

Page 7

Image 7
Contents Flowtron Mosquito PowerTrap Operating Instructions Carton Contents Table of ContentsUnpacking Instructions Needs to be replaced How Your Flowtron Mosquito PowerTrap WorksYour Flowtron Mosquito PowerTrap Your Enemy the MosquitoRules for Safe Use PlacementConnect Propane Regulator AssemblyPowerTrap MT-200 & MT-300 series Tank Stand MT-200 series onlyR e e n OperationTo Install the Octenol Cartridge MaintenanceOctenol Cartridge Trouble Shooting Chart Accessories

MT-200 Series, MT-300 Series specifications

Flowtron Outdoor Products, a leader in insect control solutions, offers the MT-300 Series and MT-200 Series, designed to enhance outdoor living spaces by effectively reducing pests. These versatile units are perfect for patios, decks, and gardens, ensuring a comfortable and enjoyable experience without the annoyance of pesky insects.

The MT-300 Series is equipped with a powerful 120-watt bulb that emits ultraviolet light, attracting a wide range of flying insects, including mosquitoes, flies, and moths. The durable construction of the MT-300 ensures long-lasting performance even in harsh outdoor conditions. One of the standout features of this model is its patented, non-clogging killing grid, which ensures efficient pest elimination without maintenance hassles. The design also allows for easy bulb replacement, ensuring that homeowners can keep their spaces free from pests throughout the season.

In contrast, the MT-200 Series offers a compact design suitable for smaller outdoor areas, such as balconies or smaller yards. This series uses a 40-watt ultraviolet bulb to effectively draw in insects while maintaining low energy consumption. The MT-200 is designed with user-friendliness in mind, featuring a simple plug-and-play operation. It is lightweight and portable, allowing users to easily relocate it based on their needs. Like the MT-300, the MT-200 also includes a non-clogging grid, ensuring reliable insect control.

Both series feature built-in safety features, including an outer protective mesh, preventing accidental contact with the electric grid. This makes them safe for homes with children and pets. Additionally, these units are environmentally friendly, using no harmful chemicals or sprays, making them suitable for organic gardening and eco-conscious consumers.

Overall, the Flowtron MT-300 and MT-200 Series are excellent choices for anyone looking to reduce outdoor flying insects. With their robust construction, energy-efficient operation, and effective pest control capabilities, they stand out as must-have outdoor products for the warmer months. By employing advanced technologies and user-centric designs, Flowtron continues to solidify its position as a trusted name in outdoor pest management. Enjoy your outdoor spaces with ease and confidence, free from the distraction of unwanted insects.