OPERATING INSTRUCTIONS
GETTING TO KNOW YOUR LEAF BLOWER
4.Slide blower tube onto air outlet. (Fig. 11)
Fig. 11
5.Attach hook on blower to bar on air inlet cover. (Fig. 12)
Fig. 12
6.Lift up handle on air inlet cover to engage locking tab. (Fig. 13)
1.The switch has three (3) power settings. ‘O’ is OFF. ‘I’ is for low air power or low suction power. “ll” is for the highest air power or suction power. See Fig. 14 for power speeds.
2.Always use high power for vacuum feature of leaf blower to ensure best results.
Fig. 14
How to Attach the Extension Cord
NOTE: DO NOT use an extension cord over 150 feet long.
1.Use only with a 2 conductor extension cord intended for outdoor use with a polarized plug, with one blade larger than other, UL listed.
2.Form a loop with the extension cord. (Fig 15)
4 | 11 |
| 2 |
|
| ||
|
|
| 3 |
6 |
|
|
|
|
| 1 | 9 |
|
|
| |
7 |
| 5 |
|
|
|
| |
| 6 |
|
|
|
|
| 8 |
|
|
| 10 |
Fig. 13
IMPORTANT: The leaf blower will not run unless the vacuum tube is locked in place.
How to Use the Power Switch
WARNING: If you do not fully
seat the extension cord on the inlet plug, the loose plug could lead to overheating and cause a fire, or electrical shock.
Ensure that you fully seat the cord on the plug and use the cord lock feature to secure the cord.
IMPORTANT: Check the power cord frequently during use for holes in the insulation or other damage. DO NOT use a damaged cord.
DO NOT run the cord through standing water or wet grass.
Fig. 15
3.Slip loop through power cord guide. (Fig 16)
Fig. 16
4.Latch loop of power cord onto hook. (Fig. 17)
Hook for |
|
power cord | Fig. 17 |
5.Plug extension cord into outlet on back of unit. (Fig. 18)
Fig. 18
|
|
| 12 |
1. | Power Unit | 7. | Lower Vacuum Tube |
2. | On/Off, Speed Control | 8. | Debris Collector Bag |
3. | Handle | 9. | Debris Collector Bag Adapter |
4. | Blower Tub | 10. Air Inlet Cover | |
5. | Vacuum Easy Grip Handle | 11. Blower Outlet | |
6. | Upper Vacuum Tube | 12. Air Inlet Cover Handle | |
| Illustrations may differ from actual product. | ||
Technical Specifications |
|
| |
Voltage: | 120V., 60Hz. | ||
Current: | 12 Amps. |
| |
Sound pressure level (dB): | ≤ 92 |
| |
Sound power level Lwa (dB(A)): ≤ 105
Use of ear protection is recommended when using this unit.
8
5