Maintenance
Regular emptying of the basket is important to ensure the smooth operation of the cutting cylinders. If paper is within 2 inches of shredder head, turn off and unplug the shredder, remove the shredder head and empty the basket.
Regular oiling of the shredder is also necessary to ensure proper performance. If you are running the shredder at or near capacity, we recommend oiling it monthly. Using Fellowes Powershred Lubricant #35250 or other
•Apply oil over full width of paper entry (E) with shredder in off [O] position.
•Press control switch to automatic [I] position which will cause shredder to run for about 2 seconds.
•Press and hold control switch in reverse [R] position for
•Repeat above automatic [I] and reverse [R] sequence three times.
REMINDER: Do not use flammable synthetic oil,
Troubleshooting
If you have a problem with your shredder, check the symptoms and remedies below. If you cannot solve the problem this way, contact Fellowes Customer Service. Do not open shredder head to attempt repair: It could expose you to serious electric shock and will void your warranty.
Symptom | Remedy |
Shredder does not start or stops | • Make sure shredder is plugged in and |
while shredding | switch is in automatic (I) position |
| • If paper appears to be jammed, follow |
| instructions under Operation |
| • Check shredder head position; follow |
| instructions under |
| • Wait 4 minutes for shredder to cool |
| down before trying again |
|
|
Shredder runs below capacity | • Check to see if basket is full, follow |
| instructions under Maintenance. |
| • Oil cutting cylinders. Follow instructions |
| under Maintenance. |
|
|
Shredder continues to run for 1 or 2 seconds after shredding has been completed
•No action required. This is a self- cleaning function.