Charging the Cordless Sweeper, Before you start

CHARGING THE CORDLESS SWEEPER

1.Connect the charger plug to the charging jack or hole on the back of the

sweeper. Plug the the charging adapter into the wall outlet. (120V., 60Hz.) Use only TechWorld Charger AD-0720-UL-8 or AD-0815-UL8. (Fig. 9)

2.This cordless sweeper is powered by Ni-Cd batteries. Before first use, they must be charged for a minimum of 20 hours.

3.When recharging the unit, the "On/Off" switch must be in the "OFF" position.

4.The charging light indicator on the top of the sweeper will illuminate to indicate that the sweeper is properly charging.

5.To recharge, repeat step #1 above. Charging times will vary depending upon the amount of usage between charging cycles.

Fig. 9

NOTE: If, when you place the sweeper to recharge and the charging indicator light does NOT illuminate, then press the On/Off button once to turn the sweeper off. The charging indicator light should now light up.

NOTE: Peak performance may only be realized after the unit has been charged and discharged two (2) or three (3) times.

IMPORTANT: To maintain peak performance of your cordless sweeper, it is recommended that the unit be fully discharged, then completely re-charged at least once a month.

CAUTION

•Use only with the battery pack supplied with the unit.

•Do not attempt to remove the battery pack from the unit to charge it.

•Never attempt to throw the battery pack or unit into a fire or incinerate it.

•Do not attempt to remove or damage the battery casing.

•Battery must be recycled or disposed of properly at the end of it's service life.

STORING THE CORDLESS SWEEPER

Your cordless sweeper may be stored by using the slot on the back of the upper handle and hanging it from a screw secured to a wall or other vertical surface. Use a #6 flat or pan head screw with the appropriate hardware for the surface that the sweeper will be mounted on, (i.e. gyproc). Allow the screw head to extend a approximately 3/16" from the mounting surface. Always empty your sweeper before hanging up for storage.

ASSEMBLING YOUR CORDLESS SWEEPER

Before you start:

Your Cordless Sweeper will require very little assembly. You should remove it from the carton and familiarize yourself with all the components listed per the exploded view drawing (pg.2) This will help you in the assembly and operation of your cordless sweeper.

Note: The charging adapter is shipped inside the dust cup.

Lower Handle

Fig. 1

Fig. 2

1.Insert the lower handle - small end - into the sweeper power head, or the floor attachment (Fig.3) Push until firmly in place. (Fig. 1) HANDLE CAN BE ROTATED FOR PROPER USE.

2.Assemble the metal extension handles by pushing the plastic insert into the mating metal tube. Push until only small portion of insert is visible or you cannot press any farther into the tubing. Push the handle assembly into the upper handle.

NOTE: One metal extension tube has a different plastic insert. This tube should be on the bottom of the handle.

Insert the handle assembly into the lower handle so that the tab on the plastic insert snaps into the open slot on the lower handle. (Fig. 3)

Insert into Lower

Handle

Fig. 3

3.Place the handle into the upward storage position.

4.Plug the charging adapter into the sweeper power head charging jack. Plug

the charging adapter cord into a standard electrical outlet (120V, 60Hz.). The green charging indicator should illuminate. If it does not, depress the On/Off switch one time.

CAUTION: ALWAYS USE ADAPTOR SUPPLIED (ONLY) WITH SWEEPER.

V1725HY specifications

The Euro-Pro V1725HY is a versatile and innovative vacuum cleaner designed to meet the cleaning demands of modern households. Loaded with advanced features and cutting-edge technologies, this vacuum promises efficiency and convenience for users tackling everything from everyday dust to stubborn pet hair.

One of the standout characteristics of the Euro-Pro V1725HY is its powerful suction capabilities. Equipped with a high-performance motor, it delivers impressive suction strength that can capture fine particles and larger debris alike. This makes it suitable for a variety of surfaces, including carpets, hardwood floors, and tile. The vacuum also features multiple height adjustments, allowing users to seamlessly transition from one surface type to another without losing suction power.

The design of the Euro-Pro V1725HY incorporates a lightweight and ergonomic build, making it easy to maneuver around the home. Users can easily navigate around furniture and reach tight corners thanks to its swivel steering technology, ensuring a thorough clean in every nook and cranny. With a long power cord, the vacuum allows for extended reach without constantly switching outlets, an essential feature for larger homes.

To enhance convenience, the Euro-Pro V1725HY includes a variety of attachments tailored for specific cleaning tasks. The crevice tool is perfect for getting into narrow spaces, while the dusting brush effectively removes dust from shelves and delicate surfaces. Additionally, it offers a pet hair tool, specifically designed to lift embedded pet hair from upholstery and carpets, making it an ideal choice for pet owners.

An integral feature of the Euro-Pro V1725HY is its filtration system. The vacuum uses a multi-stage filtration process that captures allergens and dust particles, enhancing indoor air quality. This makes it a smart choice for allergy sufferers seeking a cleaner and healthier living environment. The vacuum's dust container is designed for easy disposal, ensuring that users can maintain cleanliness without hassle.

In summary, the Euro-Pro V1725HY vacuum cleaner combines powerful suction, user-friendly design, and specialized cleaning tools to provide a comprehensive cleaning experience. Its focus on versatility, ergonomic performance, and effective filtration sets it apart in the competitive vacuum market, making it a reliable choice for households looking for efficient cleaning solutions. Whether tackling daily messes or deep-cleaning tasks, the Euro-Pro V1725HY is up to the challenge.