Using Your Ceiling Fan

BP7386, CF3400 Corsair 11/25/09 6:20 AM Page 8

TO NEUTRAL	TO FAN MOTOR LOAD

	BLACK
3	BLACK
4
2
1
0

TO 120VAC

SOURCE

HOT

Figure 8

Figure 10

IMPORTANT

Fan installation must be completed, including the installation of the fan blades, before testing of the controls.

7. Attach the fan control to the wall outlet box with two 6-32 x 3/4” screws (provided with control).

8. Position the wall plate (provided with control) onto the speed control. Using the two 6-32 x 1/4” screws, fasten the wall plate to the control (Figure 9).

9. Installation of the ceiling fan is now complete. Restore power at the main fuse box or circuit breaker panel.

OUTLET BOX

SW46 FAN CONTROL

4 3 2 1 0

6-32 x 3/4" SCREW (2)

WALL PLATE

6-32 x 1/4" SCREW (2)

1. Restore electrical power to the outlet box by turning the electricity on at the main fuse box or circuit breaker panel.

2. Check the operation of the fan by sliding the bar of the control through the four positions marked 1 - 4 (“0” position is OFF) (Figure 10).

3. All fans are shipped from the factory with the reversing switch positioned to circulate air downward. If airflow is desired in opposite direction, turn your fan OFF and wait for the blades to stop turning, then slide the reversing switch to the opposite position, and turn fan on again (Figure 11).

4. The fan blades will turn in the opposite direction and reverse the airflow.

REVERSE SWITCH

Figure 9

Figure 11

8	Model No.: CF3400