Emerson CF100GES00, CF100AP00, CF100DBK00 Hairpin Clip Setscrews Downrod Clevis PIN Motor Coupling

Page 6

BP7355 PERISTYLE CF100 9/19/07 11:26 AM Page 6

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrews securely tight- ened. Failure to verify that the pin and setscrews are properly installed (as shown in Figure 3) could result in the fan falling.

5. Reinstall the hanger ball (Figure 5) on the downrod as follows. Route the three 80” motor leads through the hanger ball and slide the hanger ball over the downrod. Position the pin through the two holes in the downrod and align the hanger ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the

HAIRPIN CLIP

SETSCREWS

Figure 3

DOWNROD

CLEVIS

PIN

MOTOR COUPLING

setscrew in the hanger ball. A loose setscrew could create fan wobble.

!WARNING

It is critical that the pin in the hanger ball is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are properly installed could result in the fan falling.

3. Tighten the setscrews (Figure 3) securely while pulling up on the down- rod.

NOTE: The setscrews must be properly installed as described above, or fan wobble could result.

4. Make sure the grommet is properly installed in the coupling cover, then slide the coupling cover on the down- rod until it rests on the motor housing. Place the ceiling cover over the down- rod. Be sure that the ceiling cover and the coupling cover are both oriented correctly (Figure 4).

DOWNROD

CEILING

COVER

HANGER BALL

PIN DOWNROD

SETSCREW

CEILING

 

COVER

Figure 5

6. The fan comes with blue, black and white leads that are 80” long. Before installing the fan, measure up approxi- mately 6 to 9-inches above top of hang- er ball/downrod assembly. Cut off excess leads and strip back insulation 1/2” from end of leads.

7. Mount the fan blades to the blade flanges using three 10-24 x 9mm truss head screws and three fiber washers (supplied) (Figure 6).

COUPLING

COVER

Figure 4

!WARNING

To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balanc- ing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

6

U.L. Model No.: CF100

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Peristyle Safety Instructions Additional Safety Instructions for InstallationMaterials Setting Operating Frequency of Transmitter Receiver Preset Memory FeatureInstallation of Battery GeneralHow to Assemble Your Ceiling Fan Electrical RequirementsHairpin Clip Setscrews Downrod Clevis PIN Motor Coupling Slot for Flange Switch Screw Access How to Hang Your Ceiling Fan Outlet BOX TAB AT Least FloorHow to Wire Your Ceiling Fan Receiver White WireWhite Installation Operating Your Ceiling FanStorage Bracket MaintenanceAccessories Important Care InstructionsTrouble Shooting Trouble Probable Cause Suggested RemedyRepair Parts Repair Parts Listing Key Model No DescriptionLimited Warranty

CF100DBK00, CF100AP00, CF100GES00 specifications

The Emerson CF100GES00, CF100AP00, and CF100DBK00 are advanced, high-performance fan control solutions designed to optimize HVAC applications and enhance overall energy efficiency. These models are part of Emerson’s comprehensive range of controls that cater to modern residential and commercial requirements, ensuring reliable comfort and performance.

The CF100GES00 model is equipped with a range of notable features, including a user-friendly interface that allows for easy installation and programming. This model boasts sophisticated algorithms that facilitate automatic adjustments based on the system's performance, promoting significant energy savings. Additionally, the model offers integrated diagnostics that reduce maintenance time and costs by promptly alerting users to potential issues before they escalate.

Moving on to the CF100AP00, it stands out for its innovative adaptive technology that enables it to learn from the environment in which it operates. This feature ensures that the control system optimizes fan operation according to real-time conditions, which enhances indoor air quality and comfort while minimizing energy consumption. The CF100AP00 also integrates seamlessly with a range of existing systems, making it a versatile choice for retrofit projects or new installations.

The CF100DBK00 model is known for its robust design and durability, making it suitable for demanding applications. Its advanced communication capabilities allow it to interface smoothly with various building management systems, enabling centralized monitoring and control. This model also features multiple speed settings, providing users with flexibility to tailor fan performance to specific needs.

All three models utilize Emerson’s proprietary technologies, such as the Smart Speed Control and enhanced thermal management, to ensure optimal performance in various operating conditions. These technologies help in reducing noise levels while maintaining efficient airflow, making them ideal for quiet environments like libraries, classrooms, or office spaces.

In summary, the Emerson CF100GES00, CF100AP00, and CF100DBK00 fan control solutions offer a blend of advanced features, innovative technologies, and exceptional reliability. Their focus on energy efficiency, user adaptability, and seamless integration with existing systems positions them as frontline solutions in modern HVAC applications.
Top Page Image Contents