Emerson CF3100AGW00 owner manual Unpacking Instructions, Tools Needed for Assembly

This Manual Is Designed to Make it as Easy as Possible for You to

Assemble, Install, Operate and Maintain Your Ceiling Fan

Tools Needed for Assembly

One stepladder One wire stripper

One Phillips head screwdriver

Three 15-watt (max.) candelabra base bulbs (not supplied)

Installed Wire Length	Wire Size A.W.G.
Up to 50 ft.	14
50-100 ft.	12

MATERIALS

Wiring outlet box and box connectors must be of type required by the local code. The minimum wire would be a 3-conductor (2-wire with ground) of the wire size, to right:

WARNING

If you feel you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician.

Unpacking Instructions

For your convenience, check-off boxes are provided next to each step. As each step is completed, place a check mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should you be interrupted.

WARNING

Do not install or use fan if any part is damaged or missing. Call Toll-Free:

1-800-654-3545

WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.

6.One hairpin clip

7.One clevis pin

8.Sixteen M5 x 12mm pan head screws

9.Eleven #10-32 x 14mm oval head screws

10.Eight #8-32 x 10mm flat head screw

11.Sixteen lockwashers

12.Three twist-on wire connectors

13.One balancing kit

NOTE: Place the parts from the loose parts bags in small containers to keep them from being lost. If any parts are missing, contact your local retailer or catalog outlet for replacement before proceeding.

1. Open styrofoam unit containing fan. Remove upper and center sections of styrofoam unit. Remove parts and check to see that you have received the following:

b.

a. One Fan Motor and Housing Assembly		a.
b. One Ceiling Cover				d.
c. Five Fan Blades
d. Five Flange Assemblies
e. Five Flange Medallion Assemblies
f. One Hanger Ball/Downrod Assembly				e.
g. One Hanger Bracket
h. One Upper Light Kit Assembly			c.
i. One Lower Light Kit Assembly		f.
j. One Light Kit Glass Shade		g.
k. One Non-Light Switch Cover
l. One Decorative Scroll Assembly
m.One SW116 Fan/Light Wall Control				h.
(transmitter) Includes Three Covers		i.		l.
n. One SW105 Receiver
o. One 50-Watt (max.) Bi-Pin Halogen
(type GY8) Bulb
p. One loose parts bag containing:				o.
1. One 5/16-18 x 1/4” setscrew		j.
2. One 5/32" hex wrench
		m.
3. Two 8-32 x 1-1/4” threaded studs		k.	n.	p.
4. Two #8-32 knurled knobs
5. Two #8 external tooth lockwashers	3		U.L. Model No.: CF3100