General PRE-OPERATION Instructions

Priming Pump For Electric Packs

The Power pack system is located under the skirting. The equipment can be serviced by simply removing the door. The door is located on the side of the spa where three panels are located, usually on the side of the spa with the lounger, or the side where the topside control panel is located.

It is important to make sure that all of the air is out of the pump(s) before operating. To do this follow procedures below:

•Turn off power at the breaker

•Make sure the gate valves are open

•Fill the spa with water going thru the filter

•Turn the power on at the breaker

•Start the pump on low speed and water should start circulating within one to two minutes. If water does not start circulating, turn pump from low to high until prime is picked up.

•If pump still does not prime, please see “Trouble Shooting Guide” located in the back of this manual.

NOTE!

Note: Equipment style and location will vary by model

1 24

3		7		8
5	6

1. Ozonator (Optional)		5	5.	Gate Valve
2. LED Controller (Optional		6	6.	Flow Thru Heater
3. Auxiliary Pump (Optional)		7	7.	Equipment Pack
4. Power Supply (Optional)		8	8. Dual Speed High Performance Pump

Set thermostat, located on top side control panel, to desired temperature and continue heating until desired temperature has been reached. Depending on equipment, this will normally take 8 to 10 hours.

WARNING!

WARNING: Do not run spa with gate valve (s) closed or run pump with no water circulating in spa for long periods. This could damage the spa equipment.

Dynasty Spas Operator’s Guide • www.dynastyspas.com

2008 specifications

Dynasty Spas has been a recognized name in the spa industry for its commitment to quality and innovation. In 2008, Dynasty Spas introduced several models that showcased their dedication to creating superior hot tubs that cater to a wide range of preferences and needs. One standout feature of the 2008 lineup was the introduction of their advanced hydrotherapy systems, which combined powerful jets with ergonomic seating to provide a truly immersive and therapeutic experience.

The spas in the 2008 collection came equipped with the Dynasty's patented "Dyna-Stone" synthetic material, offering enhanced durability and resistance to fading, cracking, and peeling. This material not only ensured longevity but also made upkeep easier for users as it required minimal maintenance compared to traditional materials. The spa shells were available in a range of vibrant colors, allowing buyers to customize their spas to match their outdoor décor.

Another core characteristic of the 2008 Dynasty Spas was the incorporation of energy-efficient technologies. The models featured high-density foam insulation that minimized heat loss, thereby reducing energy consumption and utility bills. Additionally, the spas were equipped with efficient pumps and heaters designed to optimize performance while maintaining a low environmental impact.

The user-friendly control panels were another highlight in the 2008 series. Featuring intuitive layouts, they allowed users to easily adjust temperature settings, jet power, and lighting options. Most models included multi-colored LED lighting systems that enhanced the ambiance during evening use, transforming the spa into a relaxing oasis.

Safety was also a priority for Dynasty Spas in 2008, with several models featuring a locking safety cover to ensure that children and pets were protected when the spa was not in use. The spas also came with built-in anti-slip designs and rounded edges, prioritizing user safety while enjoying their spa experience.

With a focus on therapeutic benefits, customizable features, and strong energy efficiency, the 2008 Dynasty Spas collection represented a significant step forward in the world of hot tubs. This combination of advanced technology and thoughtful design reinforced Dynasty Spas' reputation as a leader in the spa industry, promising an unparalleled experience for enthusiasts and newcomers alike.