3M Library Security System | 3M Accessories |
|
|
4.103Mt On-Counter Desensitizer Model
763 (For Use With Recorded Magnetic Media)
Description/Characteristics
The 3Mt
This device is not intended to desensitize security strips which have been applied directly to computer software, as the disks may be damaged.
Security strips on protected items must be properly desensitized so the items can be carried through the detection system without causing an alarm.
Operating Instructions
To desensitize security strips:
Draw the marked item across the surface of the Model
763.Make sure the strips are against the back or horizontal surface of the unit. Place video tapes against the back of the unit as shown in the following example.
Place audio tapes on the horizontal surface of the unit as shown in the following example.
Installation
The 3M Model 763 is a moveable,
Only one pass is necessary to fully desensitize a security strip.
To avoid damage to credit cards or computer software, do not permit credit cards or computer disks to make direct contact with the 3M Model 763.
|
|
|
E 3M 1999 September |