3M Accessories | 3M Library Security System |
|
|
4.63Mt On-Counter Resensitizer Model
2011 (For Use With Recorded Magnetic Media)
Description/Characteristics
The 3Mt
This device is not intended to resensitize security strips which have been applied directly to computer disks, as the disks may be damaged.
Security strips must be resensitized when the marked items are returned. Improperly resensitized items will not alarm when passed through the library system.
Operating Instructions
To resensitize security strips, pass the marked article across the surface of the 3M Model 2011. Make sure the security strips are in full contact with the 3M Model 2011.
Strips passed across the 3M Model 2011 in the direction opposite the arrows will not be resensitized.
Model 2011
Installation
The 3M Model 2011 is a moveable,
The 3M Model 2011 should be located away from areas which are readily accessible to customers.
Only one pass is necessary to fully resensitize each security strip.
To avoid damage to credit cards or computer software: Do not attempt to resensitize security strips which have been applied directly to computer software.
Do not permit credit cards or computer software disks to make direct contact with the 3M Model 2001.
E 3M 1999 September |