3M 3802 4.33Mt On-CounterDesensitizer Model, For Use With Recorded Magnetic Media, 3M Accessories

Models: 2301 3804 3501 3502 3803 3802 3801 2302

1 91
Download 91 pages 53.91 Kb
Page 32
Image 32
4.33Mt On-Counter Desensitizer Model

3M Accessories

3M Library Security System

 

 

4.33Mt On-Counter Desensitizer Model

2001 (For Use With Recorded Magnetic Media)

Description/Characteristics

The 3Mt On-counter Desensitizer Model 2001 is designed to desensitize 3Mt Tattle-TapetSecurity Strips. This includes security strips which have been surface-applied to records, audio cassettes, and prepackaged computer software.

This device is not intended to desensitize security strips which have been applied directly to computer software, as the disks may be damaged.

Security strips on protected items must be properly desensitized so the items can be carried through the library security system without causing an alarm.

Model 2001

Installation

The 3M Model 2001 is a moveable, non-electric, on-counter device which requires no installation. However, the 3M Model 2001 should be used away from areas which are readily accessible to customers.

Operating Instructions

To desensitize security strips:

SDraw the marked item across the black plate on the Model 2001.

SMake sure the security strip is in full contact with the black plate on the Model 2001.

Only one pass is necessary to fully desensitize a security strip.

Passing the marked item across the 3M Model 2001 first in one direction and then in the other (scrubbing motion) may partially resensitize the strip and cause unwanted alarms.

To avoid damage to credit cards or computer software, do not permit credit cards or computer software to make direct contact with the 3M Model 2001.

4-6

E 3M 1999 September

Page 32
Image 32
3M 3802, 3801 4.33Mt On-CounterDesensitizer Model, For Use With Recorded Magnetic Media, To desensitize security strips