3M 3802 5.1Print Media Protection, 3Mt Tattle-Tapet Security Strips: B1, Installation in Books

Models: 2301 3804 3501 3502 3803 3802 3801 2302

1 91
Download 91 pages 53.91 Kb
Page 64
Image 64
5.1Print Media Protection —

3Mt Tattle-TapetSecurity Strips

3M Library Security System

5.1Print Media Protection —

3Mt Tattle-TapetSecurity Strips: B1

Description/Characteristics

The 3Mt B1 Security Strip is a security strip which may be secured inside the spine of a book.

Security strips on protected items must be properly desensitized so the items can be carried through the detection system without causing an alarm.

Security Strip Application

The 3M B1 security strips should be applied and stored away from areas which are readily accessible to patrons.

Security strips should be applied only to surfaces which are flat, clean, dry and at room temperature. For maximum adhesion, minimize touching the adhesive surface of the security strips.

Installation in Books

1. Remove the liner from the security strip.

2.Place 1/4 inch [6 mm] of the B1 security strip on the tip of the bayonet.

3.Open the book so the book cover separates from the binding.

5-2

E 3M 1999 September

Page 64
Image 64
3M 3802 5.1Print Media Protection, 3Mt Tattle-Tapet Security Strips: B1, Installation in Books, 3M Library Security System