3M 2302, 3802 3.5Turning Your System On, 3.6How to Verify System Operation, System Configuration

Models: 2301 3804 3501 3502 3803 3802 3801 2302

1 91
Download 91 pages 53.91 Kb
Page 12
Image 12
3.5Turning Your System On

System Configuration

3M Library Security System

 

 

 

3.5Turning Your System On

Your 3Mt Detection System Model 2301/2302 has been designed to be left on continuously.

To turn the system on:

2301/2302 Baseplate Mounting - Connect the power cord to a power outlet.

2301/2302 Direct Mount - Connect the power cord to a power outlet, and turn the key switch to On.

Allow two minutes for the system to warm up.

3.6How to Verify System Operation

Your 3M detection system Model 2301/2302 should be inspected daily for proper operation.

System operation may be verified with the built-in Diagnostic Display which is located on lattice A. During normal operation, the current patron count and alarm count will be displayed. A leading “P” indicates a patron count (for example, P123456). A leading “A” indicates an alarm count (for example, A1234).

If a system problem should occur, a code number will appear in the Diagnostic Display. Refer to the Troubleshooting Guide, Section 6-9, if a code number is present.

An alarm condition is indicated by an audible signal. The specific corridor in which an alarm condition exists is indicated by the light built into the top of lattice A or C.

There is no need for repetitive walk-through testing.

3-4

E 3M 1999 September

Page 12
Image 12
3M 2302 3.5Turning Your System On, 3.6How to Verify System Operation, System Configuration, 3M Library Security System