3M 3502 5.4Compact Disc Protection, 3Mt Tattle-Tapet Security Overlay: DCD-2, E 3M 1999 September

Models: 2301 3804 3501 3502 3803 3802 3801 2302

1 91
Download 91 pages 53.91 Kb
Page 70
Image 70
5.4Compact Disc Protection —

3Mt Tattle-TapetSecurity Strips

3M Library Security System

5.4Compact Disc Protection —

3Mt Tattle-TapetSecurity Overlay: DCD-2

Description/Characteristics

The 3Mt Tattle-TapetDCD-2 Compact Disc Security Overlay is designed to be applied directly on CDs and CD-ROMs. The security strip and overlay are combined to simplify installation.

Once applied, protection and full circulation of CDs and CD-ROMs is provided for life of the marked item.

Security strips on protected compact discs must be properly desensitized so the compact discs can be carried through the detection system without causing an alarm.

Security Strip Application

The 3M Tattle-Tape DCD-2 overlay should be applied and stored away from areas which are readily accessible to patrons.

DCD-2 overlays should be applied only to surfaces which are flat, clean, dry and at room temperature. For maximum adhesion, minimize touching the adhesive surface of the overlay.

Marking Compact Discs

1.Place the security strip/overlay on the label side of the compact disc.

2.Center the security overlay on the compact disc and hold it firmly in position.

3.Lift the smaller portion of the overlay and bend it back while removing the liner, rolling the adhesive surface of the overlay onto the CD surface.

4.Remove the liner from the large portion of the overlay as in step 3 securing it to the CD surface.

5.Rub the entire surface of the overlay to securely bond it to the CD.

Note: Allow 24 hours for maximum adhesion of overlay to CD.

5-8

E 3M 1999 September

Page 70
Image 70
3M 3502 5.4Compact Disc Protection, 3Mt Tattle-Tapet Security Overlay: DCD-2, Marking Compact Discs, E 3M 1999 September