3M 2301 Security Strips Used with 3Mt Desensitizer Model, 3M Library Security System, Exceptions

3M Library Security System 3M Accessories

Security Strips Used with 3Mt Desensitizer Model 930

3Mt Tattle-TapetSecurity Strips

102

103

B1 (DS-B1-N)

B2 (DS-B2-N) DCD-2

Security Strip Application

Security strips should be applied only to surfaces which are flat, clean, dry and at room temperature. For maximum adhesion, minimize touching the adhesive surface of the security strips.

The 3M Model 930 should be installed away from areas which are readily accessible to customers.

Never leave a desensitizer unattended. Access to a desensitizer may allow your security sys- tem to be defeated.

Typical Items Used with 3M Model 930 Desensitizer

Books Magazines

All general items — excluding recorded magnetic media.

Exceptions

Keep credit cards, recorded magnetic media (audio tapes, video tapes or computer disks) and stem-wind and self-wind wrist watches at least six inches [150 mm] away from the 3M Model 930 surface to prevent magnetic damage.

A yellow warning label is supplied by 3M and should be secured on or near the 3M Model

930 to advise customers of potential damage to recorded magnetic media.

Keep a minimum of 12 inches from computers and computer displays (CRTs).

Security Strip Storage Conditions

Store security strips at 50° - 90°F [10° - 32° C] and at 20 - 70% relative humidity.

Store security strips in a clean area and out of direct sunlight. Rotate stock.

Store security strips at least two feet [0,6 m] away from the 3M Model 930.

E 3M 1999 September 4-5