System Configuration

3M Library Security System

 

 

 

3.10M3501/M3502 Detection System

Important Safety Instructions

Internal Use

The 3Mt Detection System Model 3501/3502 is designed to detect the unauthorized removal of media from the library. It is designed to be positioned inside the library at the library exit. All exiting traffic should be directed through the Model 3501/3502 to maximize effectiveness. This system is designed for continuous operation. For maximum protection of the library media, use Tattle-TapetSecurity Strips and 3Mt Accessories.

Warning Labels

!WARNING

High Voltage

Personal Injury Hazard. Risk of electrical shock present. Not operator serviceable. Refer all servicing to 3M factory trained service personnel. Do not open of enter panels or electronic enclosure.

!Caution

High Voltage

Personal Injury Hazard.

Attempting to change fuses without unplugging the Detection System may cause personal injury. Inserting the fuse holder in the incorrect direction could blow the fuse.

To avoid any possibility of injury, disconnect the power before attempting to change the fuse. To avoid blowing the fuse, insert the fuse holder in the correct direction.

For continued protection against risk of fire, replace only with the same type and rating of fuse.

!Caution

Possible personal injury or equipment damage. Incorrect configuration and installation of the 120/240 voltage selector may cause personal injury or equipment damage.

Install the fuse holder/voltage selector in the correct orientation. See additional information in this manual on voltage configuration and fuses.

3-10

E 3M 1999 September

Page 18
Image 18
3M 3803, 3802, 3801, 2302, 3804, 2301 manual 10 M3501/M3502 Detection System, Important Safety Instructions Internal Use