3M 3502 Wrong Direction Center Start, Spine of Material not against Model, 4-28, 3M Accessories

Models: 2301 3804 3501 3502 3803 3802 3801 2302

1 91
Download 91 pages 53.91 Kb
Page 54
Image 54
Wrong Direction

3M Accessories

3M Library Security System

 

 

Note

Multiple passes are not required to resensitize an item unless the indicator light did not turn on, then off.

Wrong Direction

Center Start

Spine of Material not against Model 764

Resensitizing Compact Disks (CDs)

The procedure for resensitizing CDs is the same as for books, except: the CD must be positioned upright as shown below and two passes must be made.

1.Pass the CD across the front surface of the Model 764 once.

2.Rotate the CD clockwise or counterclockwise 180 degrees so the bottom is now on top.

3.Pass the CD across the Model 764 a second time.

Troubleshooting

4.The Model 764 has been designed for a comfortable processing speed. The photocell must be unblocked for a short time (approximately 1.5 seconds) between books.

5.The speed with which material is processed can be increased by stacking printed materials up to the height of the vertical front surface of the unit. This is especially helpful for thin materials such as periodicals.

Indicator Light

Photocell

If the indicator light will not turn on during a proper pass, check the power connection for the Model 764. If the power connection is good, disconnect the power cord from the unit, pull out the fuse holder and check the fuse. A spare fuse is provided with each new Model 764. This unit is not otherwise operator serviceable.

!Caution

This unit is not designed to work with Magnetic Media. To prevent possible damage or loss of information, keep all such items at least 6 inches away from the Resensitizer.

4-28

E 3M 1999 September

Page 54
Image 54
3M 3502, 3802 Wrong Direction Center Start, Spine of Material not against Model, Resensitizing Compact Disks CDs, 4-28