SC-MP-DY4 / Dual-Pump System | Dynasty Spas 9919-100578-B instruction

• SC-MP-DY4 / Dual-Pump System •

The Quick Reference Card provides a quick overview of your spa's main

functions and the operations accessible with your digital control pad.

Starting Pump 1:

Press Pump 1 to turn Pump 1 on at low speed. Press a second time to turn pump to high speed. Press a third time to turn pump off. When at high speed, a built-in timer turns pump off after 20 min- utes and when at low speed after 2 hours, unless manually deactivated first.

The "Pump 1" indicator lights up when Pump 1 is on at high speed. It flashes when Pump 1 is on at low speed.

Starting Pump 2:

Press Pump 2 to turn Pump 2 on. Press a second time to turn Pump 2 off. A built-in timer automati- cally turns pump off after 20 minutes, unless pump has been manually deactivated.

The "Pump 2" indicator lights up when Pump 2 is on.

Setting water temperature:

Use Up or Down arrow keys to regulate water temperature. The temperature setting will be displayed for 5 seconds to confirm your new selection.

The "Set Point" indicator displays the

desired temperature, NOT the current water temperature!

Water temperature can be adjusted by 1˚ in- crements from 59 to 104˚F (15 to 40˚C).

Temperature display unit:

Press and hold Light key for 5 seconds to display water temperature in either Fahrenheit (˚F) or Celsius (˚C). If a power-up occurs, system re- turns to default setting (˚F).

Turning the light on:

Press Light to turn light on. Pressing a second time turns light off. A built-in timer automatically turns light off after 2 hours, unless manually deactivated first.

The "Light" indicator is displayed when light is on.

Fiber Box Option: If spa has an optional fiber box, press Light key to turn fiber box (motor and light) on. Pressing a second time turns fiber box off but leaves light on. A third time turns both motor and light off. A built-in timer turns fiber box off after

2 hours, unless it has been manually deactivated. The "Light" indicator is displayed when fiber box light is on. It flashes when fiber box motor and light are on at the same time.

LED Light Option: If spa has an optional LED light, Press Light key to turn LED lights on. To advance to the next color/display setting, press Light key twice. The LEDs will go off with the first press, then back on in the next setting with the second press. If the LEDs remain off for more than 5 sec., the color/ display sequence will reset and start back at the beginning the next time the Light key is pressed. Color/ display sequences are:

1• LEDs light up and slowly cycle through all six colors. The slow cycle restarts at the begin- ning and repeats.

2• LEDs light up and remain on in Aqua. 3• LEDs light up and remain on in Purple. 4• LEDs light up and remain on in Blue.

5• LEDs light up and remain on in Gold. 6• LEDs light up and remain on in Green. 7• LEDs light up and remain on in Red.

8• LEDs light up for 2 sec., flash off, then flash on in the next color until all six colors have been displayed. The flashing cycle then repeats itself.

9• LEDs flash on/off quickly for a strobe light effect. A built-in timer turns lights off after 2 hours unless manually deactivated first.

The "Light" icon is displayed when LED light is on.