DESCRIPTION | 99944200532 |
DESCRIPTION
Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.
Shaft Label
9
1.GRIP, FRONT - Cushioned grip for left hand.
2.SHAFT DECAL - Contain important safety information that must be followed.
3.LOWER DRIVE SHAFT ASSEMBLY - Contains a specially designed liner and the flexible drive shaft.
4.CUTTING ATTACHMENT - Sealed, gear ratio is 1.5:1 reduction..
5.AUTOMATIC OILER ASSEMBLY - Self oiling. Use high quality, low viscosity, non detergent bar and chain oil.
6.SAW CHAIN - Chain, serving as a cutting tool.
7.GUIDE BAR - 254 mm (10 inch) Bar.
8.CUTTING SHOE - Used to capture and stabilize branch while cutting. Place cutting shoe against branch, accelerate and lower saw chain into branch.
9.GUIDE BAR COVER - Used to cover guide bar and saw chain during transport and storage. Remove guide bar cover before using unit.
10 | X7702092204 |
© 10/2013 ECHO Inc.