DVD SETUP
•The sound of
When playing disc with copyright protection
•The sound will be
DOLBY DIGITAL (Default: BITSTREAM) QUICK
2CH PCM:
2 channel signals are output from the HDMI OUT terminal.
Suitable for monitors or projectors compatible with HDMI 2CH.
OFF: No audio signals are output from the HDMI OUT terminal.
To use the 5.1CH AUDIO OUT jacks.
English
• Set to BITSTREAM when the player is connected to a Dolby
Digital decoder. | AUDIO |
| |
DRC | ON | ||
• This function is effective only for | |||
DOLBY DIGITAL | BITSTREAM | ||
| DOWN SAMPLING | ON | |
the COAXIAL and OPTICAL con- | DTS | BITSTREAM | |
HDMI AUDIO | AUTO | ||
| MPEG | PCM | |
nections. | ANALOG AUDIO | 2.0CH | |
|
| ||
|
|
• When HDMI AUDIO is set to |
AUTO, this setting is fixed and cannot be changed in |
ANALOG AUDIO (Default: 2.0CH)
•This setting may not be changed depending on the HDMI connection. Set HDMI AUDIO to OFF if it occurs.
2.0CH: Output 2ch sound from the 5.1CH AUDIO OUT jacks.
AUDIO
DRC | ON |
DOWN SAMPLING | ON |
DOLBY DIGITAL | BITSTREAM |
DTS | BITSTREAM |
MPEG | PCM |
HDMI AUDIO | AUTO |
ANALOG AUDIO | 2.0CH |
|
|
some cases. |
BITSTREAM: Output by Dolby Digital.
PCM: Convert Dolby Digital to PCM.
5.1CH: Output multi channel sound from the 5.1CH AUDIO OUT jacks.
5Press the SETUP button to exit.
DTS (Default: BITSTREAM) QUICK
• Set to BITSTREAM when the unit |
is connected to a DTS decoder. |
• This function is effective only for |
the COAXIAL and OPTICAL con- |
nections. |
• When HDMI AUDIO is set to |
AUDIO
DRC | ON |
DOWN SAMPLING | ON |
DOLBY DIGITAL | BITSTREAM |
DTS | BITSTREAM |
MPEG | PCM |
HDMI AUDIO | AUTO |
ANALOG AUDIO | 2.0CH |
|
|
Speaker Setting for ANALOG AUDIO
When 5.1CH is selected for ANALOG AUDIO, some speaker settings will be required.
•During the HDMI output mode, any of the Speaker Setting is ineffective.
1Press the Cursor buttons (K or L) to select 5.1CH, then press the ENTER button.
AUTO, this setting is fixed and |
cannot be changed in some cases. |
BITSTREAM: Output DTS sound.
PCM: Convert DTS sound to PCM.
2Press the Cursor buttons (K or L) to select the below items, then press the ENTER button.
AUDIO 5.1CH
SPEAKER SIZE DELAY TIME
MPEG (Default: PCM) QUICK
• Set to BITSTREAM when the unit
is connected to an MPEG | AUDIO |
|
DRC | ON | |
decoder. | DOLBY DIGITAL | BITSTREAM |
| DOWN SAMPLING | ON |
• This function is effective only for | DTS | BITSTREAM |
HDMI AUDIO | AUTO | |
| MPEG | PCM |
the COAXIAL and OPTICAL con- | ANALOG AUDIO | 2.0CH |
|
| |
|
| |
nections. |
|
|
•When HDMI AUDIO is set to AUTO, this setting is fixed
SPEAKER SIZE
•Press the Cursor buttons (K or L) to select the speaker to set.
•Press ENTER until the desired speaker size appears.
BALANCE
AUDIO
SPEAKER SIZE
FRONT (L/R) | LARGE |
CENTER | LARGE |
SUB WOOFER | ON |
SURROUND (L/R) | LARGE |
and cannot be changed in some cases. BITSTREAM: Output MPEG sound. PCM: Convert MPEG sound to PCM.
NOTE:
•Audio Settings for DOLBY DIGITAL, DTS and MPEG may be automatically changed to BITSTREAM or PCM in some cases when using the HDMI connection.
HDMI AUDIO (Default: AUTO)
• Select the number of channels
for the HDMI audio output. | AUDIO | |
• Refer to the table on page 16 for | HDMI AUDIO | |
AUTO | ||
the actual output settings. | ||
2CH PCM | ||
• Connect appropriate external | MULTI PCM | |
OFF |
equipment for each setting.
•This setting cannot be changed when no equipment compatible with HDMI audio is connected to the HDMI OUT terminal.
•Even if an equipment compatible with HDMI audio is connected, this setting cannot be changed when the equipment is turned off or the HDMI output mode is set to hdOFF.
AUTO: The output channel number is selected automati- cally from Bitstream,
MULTI PCM:
Suitable for monitors or amplifiers incompatible with HDMI bitstream.
FRONT(L/R), CENTER, SURROUND(L/R) (Default: LARGE)
LARGE:Select this when the connected speaker is capable of playing back sounds of 100Hz or less.
SMALL: Select this when the connected speaker is not capable of playing back sounds of 100Hz or less.
OFF: Select this when it is not connected. (It cannot be set OFF on the FRONT speaker.)
SUB WOOFER (Default: ON)
ON: Select this when SUB WOOFER is connected.
OFF: Select this when it is not connected.
NOTES:
•OFF is not available for SUB WOOFER when SMALL is selected for FRONT(L/R).
•SMALL is not available for FRONT(L/R) when OFF is selected for SUB WOOFER.
•During
•During
FRONT(L/R): LARGE
CENTER: LARGE
SUB WOOFER: ON
SURROUND(L/R): LARGE
– 29 – | EN |