Echo CS-550P instruction manual Fuel and Lubricant, Fuel Statement

Page 14

FUEL AND LUBRICANT

FUEL STATEMENT

WARNING

Alternative fuels, such as E-20 (20 % ethanol), E-85 (85 % ethanol) or any fuels not meeting above requirements are NOT approved for use in ECHO 2-stroke gasoline engines.

Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement.

Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetor and other engine components.

Fuel Mix Chart 50 : 1

 

US.

METRIC

 

 

 

 

 

Gasoline

 

Oil

Gasoline

Oil

Gallons

 

US. fl. oz.

L

mL

1

 

2.6

4

80

2

 

5.2

8

160

5

 

12.8

20

400

 

 

 

 

 

GASOLINE - Use 89 Octane [(R+M)/2] (mid grade or higher) gasoline or gasohol known to be good quality.

Gasohol may contain up to 10 % Ethyl (grain) alcohol or 15 % MTBE (methyl teriary-butyl ether). Gasohol containing methyl (wood) alcohol is NOT approved.

TWO-STROKE OIL - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and JASO M345-FC/FD Standards must be used. ECHO brand premium Power Blend X™ Universal 2- Stroke Oil meets these standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738) and JASO M345-FC/FD certified oil, such as ECHO premium Power Blend X™, will void the two-stroke engine warranty.

IMPORTANT

ECHO premium Power Blend X™ Universal 2- Stroke Oil may be mixed at 50 : 1 ratio for application in all ECHO engines sold in the past regardless of ratio specified in those manuals.

Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty. Read and follow instructions in the Storage section of this manual.

CS-550P

12

Image 14
Contents Chain SAW Copyright 2010 All Rights Reserved Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationOther Safety Precautions Contents Symbols and SignsSymbol Form DecalsEcho chain saw Guide bar Saw chain Warranty registration Card CS-550PPacking List Wrench T27Nomenclature of Parts X524-003550 Part NumberChain tension adjuster Device to adjust chain tension Operator Safety Correct USE of Chain Brake Spark Arrestor MufflerGuide BAR and SAW Chain INSTALLATION/REMOVAL Preparation for USEAdjusting Chain Tension Fuel and Lubricant Fuel StatementEmission Control Emission DataHandling Fuel Exhaust and Evaporative EPA 2010 and/ or C.A.R.B. TierOperation Chain LubricantStart / Run Choke When the Engine is ColdWhen the Engine is Warm Checking Chain Tension RunningStopping Chain Lubrication TestCutting Instruction GeneralFelling the Tree Limbing BuckingChain brake function Testing the BrakeChain Brake Operation Chain brake unlockAutomatic Chain Brake Winter OperationGuide BAR Low-kickback Replacement guide barsChain and Guide BAR Combination SAW ChainSkill Levels Maintenance and CareMaintenance Intervals Carburetor Adjustment High Altitude OperationSpark Plug AIR FilterCheck Fuel System Fuel FilterMuffler Spark Arrestor SprocketCylinder Fins Automatic OilerSetting the SAW Chain Setting SAW ChainCS-550P Troubleshooting Problem Cause RemedyTechnical Data Storage After USEWarranty Statements ExceptionsPurchased Repair PARTS, Short Blocks and Accessories MANUFACTURER’S Warranty Coverage