Echo CS-530 instruction manual Operation, Chain Lubricant, Cap indication, Start / Run

Page 16

Cap indication

Fuel/oil tanks are indicated by the following illustrations.

Fuel tank cap

Oil tank cap

CHAIN LUBRICANT

Proper lubrication of the chain while in operation reduces friction between the chain and the guide bar to a minimum and assures a longer service life.

Use bar and chain oil of high quality for this purpose.

Do not use used or reclaimed oil to avoid various oiler problems.

Use ECHO bar and chain oil.

When ECHO bar and chain oil is not available: Use motor oil, etc.

Use bar and chain oil of the following grades: SAE No. 30 ....... in summer

SAE No. 10 ....... in winter or when cutting

resinous trees.

• When refueling, also refill chain oil.

OPERATION

Chain brake

Ignition switch

Start / Run

Throttle trigger lockout

Throttle trigger Choke control knob Choke

WARNING

After choke control knob is pulled and then knob is returned to original position, throttle remains a little open (latch condition).

If engine is started in this latch condition, chain starts to turn. Do not start engine before chain brake is activated.

CAUTION

After starting the engine, squeeze throttle trigger slightly to release throttle latch and pull front hand guard towards the operator immediately.

(Chain brake unlocked position)

Never use throttle latch for cutting.

Use the chain brake only in starting or in emergencies.

Starter handle

Unlock chain brake

CS-530

14

Image 16
Contents Chain SAW Copyright Kickback Safety Precautions for Chain Saw Users Rules for Safe OperationOther Safety Precautions Contents Symbols and SignsSymbol Form DecalsSafety manual Warranty registrationPacking List Echo chain sawNomenclature of Parts 890191-30131 X524-002000 X503-009050 Part NumberChain tension adjuster Device to adjust chain tension Operator Safety Correct USE of Chain Brake Spark Arrestor MufflerPreparation for USE Guide BAR and SAW Chain INSTALLATION/REMOVALKick Guard to BAR Instructions Adjusting Chain Tension Fuel and Lubricant Fuel StatementHandling Fuel Mixing InstructionsOperation Chain LubricantCap indication Start / RunWhen the Engine is Cold When the Engine is WarmChoke Open chokeRunning StoppingChecking Chain Tension Chain Lubrication TestCutting Instruction GeneralFelling the Tree Limbing BuckingTesting the Brake Chain Brake OperationChain brake function Chain brake unlockAutomatic Chain Brake Winter OperationLow-kickback Replacement guide bars Chain and Guide BAR CombinationGuide BAR SAW ChainMaintenance Intervals Maintenance and CareSkill Levels Carburetor Adjustment Cutting attachment must not move when unit is idlingAIR Filter Check Fuel SystemSpark Plug Fuel FilterAdjusting screw Decrease Increase SprocketCylinder Fins Muffler Spark ArrestorSetting the SAW Chain Setting SAW ChainCS-530 Troubleshooting Problem Cause RemedyTechnical Data Storage After USE