OPERATION | |
|
|
Move throttle position lever (A) to START/IDLE DETENT position (
).
2.Choke
Move choke (B) to "Cold Start" ( 
) position.
3.Purge Bulb
Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line.
4.Recoil Starter
Pull recoil starter handle (D) until engine fires, or maximum 5 pulls.
5.Choke
Move choke lever (B) to Run ( ) position, and if necessary, restart engine.
Note: If engine does not start with choke in “Run” position after 5 pulls, repeat instructions 2 - 5.
Note: Allow engine to warm up before use.
Starting Warm Engine
The starting procedure is the same as Cold Start except DO NOT close the choke.
1.Throttle Position Lever
Move throttle position lever (A) to START/IDLE DETENT position (
).
X7501183702
A
B
C
D
A
15
© 03/2013 ECHO Inc.