Echo PAS-225 manual Storage Hook Installation, Long Term Storage over 30 days

Page 29

Pro Attachment SeriesTM 29

Operator's Manual

Storage

Storage Hook Installation

1.Insert small end of hook into locating hole on attachment shaft.

2.Slide plastic cap onto end of attachment shaft.

Long Term Storage (over 30 days)

warning

During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result.

Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage mainte- nance which includes the following:

1.Store unit in a dry, dust free place, out of the reach of children.

danger

Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark.

2.Place the stop switch in the "OFF" position.

3.Remove accumulation of grease, oil, dirt and debris from exterior of unit.

4.Perform all periodic lubrication and services that are required.

5.Tighten all the screws and nuts.

6.Drain the fuel tank completely and pull the recoil starter handle several times to remove fuel from the carburetor.

7.Remove the spark plug and pour 7 cc (1/4 oz.) of fresh, clean, two-stroke engine oil into the cylinder through the spark plug hole.

A.Place a clean cloth over the spark plug hole.

B.Pull the recoil starter handle 2-3 times to distribute the oil inside the engine.

C.Observe the piston location through the spark plug hole. Pull the recoil starter handle slowly until the piston reaches the top of it's travel and leave it there.

8.Install the spark plug (do not connect spark plug cable).

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Pro Attachment SeriesTM Table of Contents Safety manualIntroduction Operators manualInternational symbols Safety Manual safety symbols and important informationPersonal condition and safety equipment Clear the Work Area Repetitive Stress InjuriesEPA 2010 and Later and/or C.A.R.B. Tier EquipmentEmission Control exhaust & evaporative Description Page Assembly Power head shaft/lower shaft assembly ContentsFor Nylon Line Operation Plastic shield installationRemove nylon line head Nylon line head installationTo advance trimmer line Operation Front handle installationPreparing the Trimmer/Brush Cutter for Blade Use Trimmer operation with bladesChoosing the Correct Blade Operating blower Fuel Requirements FuelMixing Instructions Starting cold engineRecoil Starter Starting warm engineSkill levels MaintenanceStopping engine Air filter Maintenance intervalsSpark plug Fuel filterCooling system Spark Arrestor Screen Exhaust Port CleaningExhaust system High Altitude Operation Carburetor adjustmentEngine Break-In Drive Shaft Lower Gear HousingLubrication Drive Shaft Upper Nylon line replacementTooth Blade Sharpening metal blades trimmersInternal engine problem See your Echo dealer TroubleshootingLong Term Storage over 30 days Storage Hook InstallationStorage Model PAS-225 Value Pack SpecificationsRecommended optional attachments Echo approved optional attachmentsExceptions Warranty Statements99922201032 12/03/09 01/2010 Pro Attachment SeriesTM Operators Manual Warranty registration Additional or replacement manuals ServiceServicing Information parts/serial number Echo consumer product support

PAS-225 specifications

The Echo PAS-225 is a versatile and powerful outdoor power tool designed for homeowners and professionals who demand efficiency and reliability in garden maintenance tasks. This product stands out in the market due to its innovative features and robust technology that simplify yard work while maximizing performance.

One of the main features of the Echo PAS-225 is its lightweight design. Weighing only about 10.5 pounds, this power head is easy to maneuver, reducing user fatigue during extended use. The unit is equipped with a low-emission, 21.2 cc professional-grade, 2-stroke engine, which not only delivers ample power for various attachments but also complies with stringent emission regulations, making it an environmentally friendly option.

The PAS-225 features a unique Power Agility system, allowing users to interchange multiple attachments with ease. This makes it a highly adaptable solution for a myriad of gardening tasks, from trimming and edging to blowing leaves and cultivating soil. The attachment system is user-friendly, enabling quick changes without the need for specialized tools.

Ergonomics play a crucial role in the design of the PAS-225. The padded handlebars provide a comfortable grip, which helps minimize strain during operation. Additionally, the unit boasts an easy start technology that ensures reliable ignition with minimal effort, setting a new standard in starting ease.

Another noteworthy technology in the PAS-225 is its vibration-dampening system. This reduces the amount of vibration transmitted to the user’s hands, enhancing comfort and control while operating the machine. It's particularly beneficial for prolonged use, making it easier to manage the tool safely.

The fuel efficiency of the PAS-225 is another significant characteristic. Featuring a special engine design that optimizes fuel consumption, users can expect longer run times between refueling, enhancing productivity without frequent interruptions.

In terms of maintenance, the Echo PAS-225 is designed for durability and ease of care. The air filter is easily accessible, facilitating quick cleaning or replacement, and the engine is built to withstand rigorous use over time, ensuring longevity and reliability.

In summary, the Echo PAS-225 is a well-engineered, lightweight, and durable power tool that excels in versatility, performance, and user comfort. Whether for a homeowner looking to maintain their yard or a professional landscaper needing reliable equipment, the PAS-225 includes all the essential features and technologies to tackle a wide range of outdoor tasks with ease and efficiency.
Top Page Image Contents