Operation, Connecting the Power Supply | Marantz SA8400 instruction

OPERATION

*In this instruction manual, some operations can only be performed with the remote control. For operations that can be performed with buttons both on the main unit and on the remote control, the

button names are shown in the mark. And for operations that can only be performed with

buttons on the remote control, the button names are shown in the mark.

To start playback form the first track

Press

PLAY

button.

To stop playback

Press STOP button.

To eject disc

Press OPEN/CLOSE button to open the disc tray and take the disc off. Press the button again to close the tray.

SWITCHING SOUND MODE (SUPER AUDIO CD)			ENGLISH
PLAY	STOP	PAUSE
DISPLAY
OFF
OPEN/CLOSE
POWER	PHONES	LEVEL
TIME
	-	+
SOUND MODE Button

CONNECTING THE POWER SUPPLY

1 Plug the power cable into AC IN jack on the back panel.

2 Turn on the power switch of the audio unit (amplifier, etc.) that is connected with this unit. Set the selector on the connected unit to this unit.

3 Plug the power cable into an AC outlet.

NORMAL PLAYBACK

SUPER AUDIO CD PLAYER PLAYBACK

		PLAY	STOP	PAUSE
		DISPLAY
		OFF
		OPEN/CLOSE
POWER	TIME	PHONES		LEVEL
q	TIME	rw
			-	+

qPress POWER switch to turn on. Display indications

The display changes in order from “TOC Reading” to “No Disc” (if there is no disc inserted) to “Super Audio CD” (for Super Audio CD).

wPress the OPEN/CLOSE button

The disc tray comes out. Place the disc with label side up on the tray.

To play a single (8cm) CD, place the disc with the indentation at the center of the tray.

e Press OPEN/CLOSE button.

rPress PLAY button.

Disc type is automatically detected and playback is started. Track number and track elapsed time(minute, second) appear on the display.

*For Super Audio CD/CD hybrid-layer discs (See page 2), the layer that is set in the start sound mode (See page 10) is played. To change the layer, use the SOUND MODE button. (See page 9)

(Exp.:Track 6, Elapsed time 2 min 8 sec)

Number of current track Minutes Seconds

TRK

Disc tray must be closed when the unit is not be used.

To pause playback

Press				PAUSE	button.

PAUSE indicator will light and playback is paused at the point that the button is pressed. To restart

playback, press PAUSE button again or press PLAY button.

To change time display

Press TIME button.

Each time TIME button is pressed, display will change in the following order. “Track elapsed time”

→“Track remaining time” → “Total remaining time”

→“Track elapsed time”.

•Track remaining time

(The remaining playing time from the playing point to the end of the current track)

“SING REMAIN”

“–” is displayed is displayed

TRK

SING REMAIN

15 16 17 18 19 20

•Total remaining time

(The remaining playing time from the playing point to the end of the last track)

“TOTAL REMAIN”

“–” is displayed is displayed

TRK

TOTALREMAIN

qPress SOUND MODE button in stop mode (not playing).

The currently selected layer or area is shown on the display window. (CD or Super Audio CD)

If SOUND MODE button is pressed again, a playable layer or area will be shown, and the layer or area will be switched to new one.

*When layer or area is switched, TOC will be read again.

*If a CD disc or Super Audio CD disc with stereo area only is loaded, sound mode cannot be changed.

*The sound mode on hybrid layer discs will be

changed in the following order.

Super Audio CD stereo area → CD layer → Super Audio CD stereo area

*Sound mode can be selected while the tray is open. Select a desired layer or area and press

PLAY button then the tray will close and playback will be started.

w Press SOUND MODE button during playback.

The currently selected layer or area is shown on the display window. (CD or Super Audio CD)

If SOUND MODE button is pressed again, the playback is stopped, and the layer or area will be switched to new one.

When you want to listen at that area, press

PLAY button again. The playback will be started.

9 10

11 12

13 14

15 16

17 18

19 20

Remaining track numbers

Playback automatically stops at the end of the final track.

15 16 17 18 19 20

*If TIME button is pressed when Super Audio CD disc that supports text is in use, time display is given priority and the text information will not be displayed afterward. To see the text information, press TEXT button.

SA8400 specifications

The Marantz SA8400 is a high-performance SACD player that exemplifies the brand's commitment to audio excellence and innovation. Launched as part of Marantz's extensive line of advanced audio components, the SA8400 offers music enthusiasts an exceptional listening experience, particularly in high-resolution formats.

One of the standout features of the SA8400 is its playback compatibility with Super Audio CDs (SACDs), standard CDs, and CD-R/RW discs. This versatility allows users to enjoy a comprehensive range of media without sacrificing audio fidelity. The player supports both stereo and multi-channel SACD formats, enabling an immersive listening experience that captures the essence of studio-quality sound.

At the heart of the SA8400 is Marantz's advanced Delta-Sigma digital-to-analog converter (DAC) technology. This cutting-edge DAC design significantly enhances audio performance by minimizing digital noise and distortion. The result is a clear, detailed, and dynamic sound reproduction that retains the richness and warmth of analog recordings while benefiting from the precision of digital processing.

The SA8400 also features a robust build quality, incorporating a heavy-duty chassis that minimizes vibrations, isolating the mechanisms from external interference. The attention to detail in the construction ensures that the audio components remain stable, even during intense playback sessions. The player is designed with a high-quality transport mechanism that further supports consistent playback performance over time.

Additionally, the Marantz SA8400 includes a range of connectivity options to enhance its usability. These include both balanced XLR and unbalanced RCA outputs, allowing seamless integration into various audio systems. The player also features a dedicated headphone output, making it convenient for personal listening.

One of the more notable technologies in the SA8400 is the inclusion of Marantz's "HDAM" (Hyper Dynamic Amplification Module), which contributes to superior sound quality by providing improved fast transient response and greater dynamic range. This technology is crucial in delivering the nuanced soundstage that audiophiles seek.

Overall, the Marantz SA8400 is a sophisticated SACD player that caters to those who seek high-fidelity audio. With its impressive technological features, versatile playback capabilities, and robust construction, it stands out as a premier choice for serious music lovers looking to elevate their listening experience.