Echo CS-400F instruction manual Vibration and Cold, Repetitive Stress Injuries

Page 9

CS-400F

SAFETY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The ignition components of this machine generate an electromagnetic field during operation which may interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons with pacemakers should consult with their physician and the pacemaker manufacturer before operating this machine. In the absence of such information, ECHO does not recommend the use of ECHO products by anyone who has a pacemaker.

Vibration and Cold

It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensations, followed by loss of color and numbness in the fingers. The following precautions are strongly recommended, because the minimum exposure, which might trigger the ailment, is unknown.

Keep your body warm, especially the head, neck, feet, ankles, hands, and wrists.

Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks, and also by not smoking.

Limit the hours of operation. Try to fill each day with jobs where operating the unit or other hand-held power equipment is not required.

If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration.

Repetitive Stress Injuries

It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the area. Some believe that prolonged exposure to vibration may contribute to CTS. CTS can cause severe pain for months or even years.

To reduce the risk of RSI/CTS, do the following:

Avoid using your wrist in a bent, extended, or twisted position. Instead try to maintain a straight wrist position. Also, when grasping, use your whole hand, not just the thumb and index finger.

Take periodic breaks to minimize repetition and rest your hands.

Reduce the speed and force with which you do the repetitive movement.

Do exercise to strengthen the hand and arm muscles.

Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness, or pain in the fingers, hands, wrists, or arms. The sooner RSI/CTS is diagnosed, the more likely permanent nerve and muscle damage can be prevented.

X7503253302

9

© 12/2013 ECHO Inc.

Image 9
Contents Burn Hazard Chain SAWTable of Contents CS-400F Packing ListRules For Safe Operation SafetyTesting The Brake Correct Use Of Chain BrakeChain Brake Operation Automatic Chain Brake Other Safety PrecautionsCS-400F Personal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdSafety Hot Surface Symbols and SignsEmission Control Exhaust / Evaporative Manual Safety Symbols and Important InformationEPA 2010 and Later and/or C.A.R.B. Tier Product Emission Durability Emission Compliance PeriodDescription Description Guide Bar and Saw Chain Installation/Removal Preparation For UseTip Guard to Bar Instructions Description Adjusting Chain Tension Fuel OperationFuel Requirements Handling FuelMixing Instructions Chain LubricantStarting Cold Engine Winter OperationSevere brake damage will result Running Starting Warm EngineChecking Chain Tension StoppingChain Lubrication Test Cutting InstructionsFelling The Tree Limbing Bucking Chain And Guide Bar Combination Guide BarSaw Chain Maintenance Maintenance IntervalsSkill Levels Engine Break-In Carburetor AdjustmentSpark Plug Air FilterCheck Fuel System Fuel FilterAutomatic Oiler Oil FilterDecrease Increase Cooling System Cleaning SprocketSpark Arrestor Muffler Spark Arrestor Screen Exhaust Port CleaningSetting Saw Chain Setting The Saw ChainMaintenance Engine Problem Troubleshooting Chart TroubleshootingStorage After Use StorageNGK BPM8Y Technical DataExceptions Warranty StatementsWarranty Statements CS-400F CS-400F Warranty Registration Additional or Replacement Manuals ServiceServicing Information Parts/Serial NumberECHO, Incorporated