SRM SPLIT BOOM/PAS CULTIVATOR ATTACHMENT 13 OPERATOR'S MANUAL
STORAGE
1.Clean cultivator attachment.
IMPORTANT
Do not immerse this attachment in water. Water will enter gear housing and damage gears, bearings and seals.
2.Apply thin coating of oil to metal parts to prevent rust.
3.Lubricate lower shaft assembly with lithium grease.
4.Store cultivator attachment in a dry, dust free place, out of the reach of children, using supplied storage hook.
Storage Hook Installation
1.Insert small end of hook into locating hole on attachment shaft.
2.Slide plastic cap onto end of attachment shaft.
SPECIFICATIONS
MODEL | SRM SPLIT BOOM AND PAS CULTIVATOR ATTACHMENT |
Length | 895 mm (35.2 in.) |
Width | 162 mm (6.4 in.) |
Height | 211 mm (8.3 in.) |
Blade Diameter | 216 mm (8.5 in.) |
Cultivating Width | 160 mm (6.3 in.) |
Weight | 1.94 kg (4.29 lb.) |
Cultivator Mounting Bore | 25.0 mm (0.98 in.) |
Coupling Square Hole | 5.4 x 5.4 mm (0.21 x 0.21 in.) |
Gear Reduction Ratio | 46.15:1 |
Gear Case Capacity | 38 grams (1.34 oz.) |
Gear Case Lubrication | EP "0" or "00" Grease |
Drive Shaft Lubrication | POWER BLENDXTM |