Echo 99944200513 manual Parts, Equipment

Page 6

6

EQUIPMENT

WARNING

Use only ECHO approved attachments. Serious injury may result from the use of a non approved attachment combination. Read and comply with all safety instructions listed in this manual and safety manual. ECHO, INC. will not be responsible for the failure of cutting devices or accessories which have not been tested and approved by ECHO for use with this unit.

Before operation a complete check of the unit must be performed;

Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.

Inspect shield for damage and that it is securely in place. Replace if shield is damaged or missing.

Check that the cutting tines are firmly attached and in safe operating condition.

The cultivator gear housing is designed for ECHO recommended tines. Do not modify the gear housing for any other purpose or replace tines with other type or size.

Parts

Do not use cultivator attachment if any part is missing or damaged.

Have repairs done only by an authorized ECHO Service dealer.

Do not use any attachment, accessory, or replacement part unless it is recommended in this Operator's Manual.

WARNING

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings.

ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.

NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.

Image 6
Contents Cultivator Pro AttachmentTM Series Table of Contents IntroductionOperators Manual Safety Manual Safety Symbols and Important Information International SymbolsPersonal Condition and Safety Equipment Hand Protection Physical ConditionEye Protection Hearing ProtectionKeep a Firm Grip Read the ManualsClear the Work Area Keep a Solid StanceParts EquipmentDescription Contents Assembly Power Head SHAFT/LOWER Shaft AssemblyOperating Techniques OperationResetting Tines for Deep Cultivation Tools Required 10 mm WrenchMaintenance Maintenance IntervalsSkill Levels Gear Housing Drive Shaft LowerLubrication Storage Hook Installation SpecificationsStorage Page SRM Split BOOM/PAS Cultivator Attachment 15 Operators Manual Servicing Information PARTS/SERIAL Number ServiceWarranty Registration Additional or Replacement Manuals Echo Consumer Product Support
Related manuals
Manual 24 pages 42.42 Kb