Operation

TIPS FOR IMPROVED

BAGGING OPERATION

Follow the mower operation instructions in the mower operator’s manual.

When utilizing the grass catcher on a lawn where grass and leaf bagging equipment has not been used, thatch and debris that has accumulated for long periods of time will be picked up. The amount collected and the total time of operation may be greater than experienced with regular use of the grass catcher.

•Always run throttle at full speed when bagging.

•Select a speed low enough to give good mower cutting performance, good quality cut and good bagging performance.

NOTE: It may be necessary to overlap width of cut to suit your conditions.

•If grass is extremely tall, it should be mowed twice. The ﬁrst time relatively high, the second time to desired height.

•Use left hand side of mower for trimming.

•Plastic trash bags (3.0 mil, 30 gallon) can be inserted inside grass catcher containers for ease of debris disposal. To remove the plastic trash bags when full:

a.Disengage blades, shift into neutral, engage the parking brake and stop the engine.

b.Unlatch and raise cover.

c.Remove one container at a time by grasping container handles and pulling toward the rear, off of the tube rails.

d.With the container resting on the ground, close and secure the top of the plastic lawn bag.

e.Tip the container on its side and slide the ﬁlled bag from the container.

f.Install a new plastic lawn bag with the edges of the bag draped over upper lip of the container.

g.Repeat for other container.

h.Reinstall containers making sure right container overlaps left container at center supports.

i.Close cover and secure latches over center support tubes.

•Avoid cutting wet grass or mowing in the morning while the dew is still heavy. Grass clippings collected under these conditions tend to be sticky and adhere to the walls of the ﬂow path causing clogging.

•If the grass catcher fails to pick up cut grass or leaves, it is an indication that clogging has occurred in the system or that the grass catcher containers are full.

a.Disengage blades, place motion control levers in neutral position.

-Unlatch and raise cover.

-Slide out containers and dispose of clippings.

-Replace containers, close cover, and latch.

b.Unlatch chutes and check for clogging.

-Remove all debris in chute.

-Reassemble and latch chutes.

CAUTION

•DO NOT operate mower with grass catcher partially installed.

•Disengage blades and stop engine before leaving mower seat to empty containers, unclogging chutes, etc.

•Close cover before starting.

•Disengage mower blades when crossing driveways or gravel surfaces and other areas where thrown objects could be a hazard.

•DO NOT attempt to vacuum up cans or other potentially hazardous projectiles.

539 132251, 539 132250, 539 132252, 539 132397 specifications

Dixon 539 series is a notable line of valves and fittings designed to enhance fluid handling in various industrial applications. Among the models in this series, the 132397, 132250, 132252, and 132251 stand out, each featuring unique attributes that cater to specific needs.

The Dixon 539 132397 model is known for its robust construction, typically made from high-quality materials resistant to corrosion and wear. This model is equipped with a secure locking mechanism that ensures leak-proof operation, making it ideal for high-pressure applications. Its intuitive design allows for quick disconnection, facilitating effortless maintenance and minimizing downtime during operation.

In contrast, the Dixon 539 132250 focuses on versatility. This model features a modular design that enables easy adaptation to various fitting types and sizes, making it perfect for diverse industrial environments. The 132250 is also engineered with advanced sealing technology that provides superior reliability, ensuring consistent performance even under demanding conditions. This flexibility allows users to customize their setups with ease, optimizing their fluid handling systems.

The Dixon 539 132252 is distinguished by its ergonomic design, which enhances user experience. Designed for ease of use, this model incorporates user-friendly handles that provide a secure grip, contributing to operational safety. Additionally, the 132252 is compatible with a wide range of hose and pipe sizes, further expanding its usability across different applications. Its lightweight construction minimizes operator fatigue, particularly in environments where prolonged handling is required.

Finally, the Dixon 539 132251 is specifically engineered for extreme temperature applications. Constructed with materials capable of withstanding significant thermal changes, this model is ideal for industries that require reliable performance under fluctuating temperatures, such as oil and gas or chemical processing. The 132251 utilizes innovative insulation technology to maintain temperature integrity while minimizing heat loss, ensuring efficient fluid transfer.

In conclusion, the Dixon 539 series, specifically models 132397, 132250, 132252, and 132251, represent a range of innovative solutions for fluid handling. Each model brings distinctive features, advanced technologies, and specific characteristics that cater to the diverse requirements of industrial applications. Whether it’s for high pressure, adaptability, user-friendliness, or temperature resilience, Dixon’s 539 series provides reliable, efficient, and effective solutions to meet the evolving demands of various sectors.