III. Children, Do not | Dixon 539 132252, 539 132397, 539 132250

SAFETY

SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS

DO NOT

•Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

•Do not mow near drop-off, ditches, or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

•Do not mow on wet grass. Reduced traction could cause sliding.

•Do not try to stabilize the machine by putting your foot on the ground.

III. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

•NEVER allow children to operate the machine.

•Keep children out of the mowing area and under the watchful care of another responsible adult.

•Be alert and turn off the machine if children enter the area.

•Before and when backing, look behind and down for small children.

•Never carry children. They may fall off and be seriously injured or interfere with safe machine operation.

•Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SERVICE

•The operation of any mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your mower or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

•Use extra care in handling gasoline and other fuels. They are ﬂammable and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel with the engine running.

-Allow engine to cool before refueling.

-Do not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel container inside where there is an open ﬂame, such as a water heater.

•Never run a machine inside a closed area.

•Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

•Never tamper with safety devices. Check for proper operation regularly.

•Keep machine free of grass, leaves, or other debris buildup. Clean oil or fuel spillage. Allow machine to cool before storing.

•Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

•Never make adjustments or repairs with the engine running.

•Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown.

Frequently check components and replace with manufacturer’s recommended parts, when necessary.

•Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

•Check brake operation frequently. Adjust and service as shown in the Operator’s Manual.

539 132251, 539 132250, 539 132252, 539 132397 specifications

Dixon 539 series is a notable line of valves and fittings designed to enhance fluid handling in various industrial applications. Among the models in this series, the 132397, 132250, 132252, and 132251 stand out, each featuring unique attributes that cater to specific needs.

The Dixon 539 132397 model is known for its robust construction, typically made from high-quality materials resistant to corrosion and wear. This model is equipped with a secure locking mechanism that ensures leak-proof operation, making it ideal for high-pressure applications. Its intuitive design allows for quick disconnection, facilitating effortless maintenance and minimizing downtime during operation.

In contrast, the Dixon 539 132250 focuses on versatility. This model features a modular design that enables easy adaptation to various fitting types and sizes, making it perfect for diverse industrial environments. The 132250 is also engineered with advanced sealing technology that provides superior reliability, ensuring consistent performance even under demanding conditions. This flexibility allows users to customize their setups with ease, optimizing their fluid handling systems.

The Dixon 539 132252 is distinguished by its ergonomic design, which enhances user experience. Designed for ease of use, this model incorporates user-friendly handles that provide a secure grip, contributing to operational safety. Additionally, the 132252 is compatible with a wide range of hose and pipe sizes, further expanding its usability across different applications. Its lightweight construction minimizes operator fatigue, particularly in environments where prolonged handling is required.

Finally, the Dixon 539 132251 is specifically engineered for extreme temperature applications. Constructed with materials capable of withstanding significant thermal changes, this model is ideal for industries that require reliable performance under fluctuating temperatures, such as oil and gas or chemical processing. The 132251 utilizes innovative insulation technology to maintain temperature integrity while minimizing heat loss, ensuring efficient fluid transfer.

In conclusion, the Dixon 539 series, specifically models 132397, 132250, 132252, and 132251, represent a range of innovative solutions for fluid handling. Each model brings distinctive features, advanced technologies, and specific characteristics that cater to the diverse requirements of industrial applications. Whether it’s for high pressure, adaptability, user-friendliness, or temperature resilience, Dixon’s 539 series provides reliable, efficient, and effective solutions to meet the evolving demands of various sectors.