Dixon 115312327R1, SPDZTR 30 CA, 966504101 manual Choke Control, Refueling

Page 20

CONTROLS

Choke Control

The choke control is used for cold starts in order to provide the engine with a richer fuel mixture.

For cold starts the throttle should be pushed forward to the choke position.

WARNING!

Gasoline is highly flammable. Observe caution and fill the tank outdoors (see the safety instruction).

Refueling

Read the safety instructions before refueling. The machine has one fuel tank, just behind the seat. The tank volume is 3 gallons (11.4 liters).

Make sure the fuel cap is properly tightened and the cap gasket is not damaged.

The engine will run on a minimum of 85-octane unleaded gasoline (no oil mix). Environmentally adapted alkylate gasoline can be used. See also Technical Data concerning ethanol fuel. Methanol fuel is not allowed. Do not use E85 alcohol based fuel. Damage to engine and components may occur.

IMPORTANT INFORMATION

Experience indicates that alcohol blended fuels (called gasohol, ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel the next season. See Storage Instructions for additional information. Never use engine or carburetor cleaners in the fuel tank or permanent damage may occur.

8050-031-a

Choke control

8050-012

Fuel tank

WARNING!

The engine and the exhaust system, become very hot during operation.

Risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes before refueling

WARNING!

Fill to bottom of filler neck. Do not overfill. Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operator Manual Page Contents Page Introduction Good Service Manufacturing NumberSymbols and decals Remove key before General Operation SafetySafety Instructions Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsSteering Control Levers Throttle Control Ignition SwitchParking Brake Choke Control RefuelingFuel Shut Off Valve Mower Deck Lifting LeverTracking Always use the high position F to transportBlade Control Lever Manual TransportTraining SteeringBefore Starting Starting the EnginePlace controls in neutral position Open the fuel valve Jumper cables To remove cables, reverse orderRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Maintenance ScheduleEvery 50 hours Always use protective glasses when handling the battery BatteryTo clean battery and terminals Safety System Tire PressuresTo replace deck belt BeltsDeck Belt EZT Belt Cutting BladesAdjusting the Mower Deck Leveling DeckCleaning Removal and installation of caster wheelUse protective glasses when cleaning and washing Caster WheelsLubrication GeneralFront Wheel Mount Front Wheel BearingsDeck spindle Steering Control ShaftsTroubleshooting Problem CauseTroubleshooting Service Winter StorageSchematic Standard Hardware Technical DataTorque Specifications Transmission SpeedZTR 30 CAEngine Productivity Overall dimensionsEquipment USA Requirements CE RequirementsService Journal Delivery ServiceHour Service After 5-10 HoursPerform the 25-hour service At Least Once Each Year Page 115 312327R1 01/21/10

115312327R1, 966504101, SPDZTR 30 CA specifications

The Dixon SPDZTR 30 CA, reference number 966504101 and part number 115312327R1, is a high-performance machine designed for various industrial applications where precision and durability are paramount. This state-of-the-art equipment is engineered for exceptional performance, making it an indispensable asset in many manufacturing environments.

One of the standout features of the SPDZTR 30 CA is its robust construction. The machinery is built from high-grade materials that offer extensive resistance to wear and tear, ensuring long-term reliability and reduced maintenance costs. This feature is particularly crucial in industries where the machines are subject to heavy workloads and harsh conditions.

Another key characteristic is its advanced technology integration. The Dixon SPDZTR 30 CA incorporates an intelligent control system, which enhances operational efficiency by allowing for precise adjustments to settings based on real-time data analysis. With this system, operators can monitor the performance and make informed decisions, leading to optimized processing times and improved productivity.

Safety is a priority with the SPDZTR 30 CA. It comes equipped with several safety features designed to protect operators and minimize the risks associated with heavy machinery. These features include emergency stop buttons, protective guards, and advanced sensors that detect potential hazards, ensuring that operations run smoothly without compromising safety.

Versatility is another hallmark of the Dixon SPDZTR 30 CA. The machine can be adapted for a wide range of applications, making it suitable for various sectors including automotive, aerospace, and construction. Whether used for cutting, shaping, or assembling components, its high adaptability makes it an excellent choice for businesses looking to maximize their production capabilities.

Moreover, the SPDZTR 30 CA is user-friendly, featuring an intuitive interface that allows operators to navigate through different functionalities with ease. Training time is significantly reduced thanks to the straightforward design, allowing businesses to focus on productivity rather than complicated operational procedures.

In conclusion, the Dixon SPDZTR 30 CA, with its unique combination of durability, advanced technology, safety features, versatility, and user-friendly design, stands out as a premier choice for industries requiring reliable and efficient machinery. Its robust capabilities ensure that it can handle even the most demanding tasks, making it a valuable addition to any manufacturing operation.
Top Page Image Contents