Dixon SPDZTR 30 CA, 966504101, 115312327R1 manual Jumper cables, To remove cables, reverse order

Page 27

operation

Slowly push the choke control down when the engine has started.

Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, “half throttle” for 3-5 minutes before loading it to heavily. USE FULL THROTTLE WHEN MOWING (no choke).

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

WARNING!

Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See Battery in the Maintenance section.)

If jumper cables are used for emergency starting, follow this procedure:

Jumper cables

1.Connect each end of the RED cable to the POSITIVE (+) terminal on each battery, taking care not to short against chassis.

2.Connect one end of the BLACK cable to the NEGATIVE (-) terminal of the fully charged battery.

3.Connect the other end of the BLACK cable to a good CHASSIS GROUND on the mower with the discharged battery, away from the fuel tank and battery.

To remove cables, reverse order

1.Remove BLACK cable first from chassis and then from the fully charged battery.

2.Remove RED cable last from both batteries.

8050-031-a

Use full throttle when mowing

IMPORTANT INFORMATION

Your mower is equipped with a 12-volt negative grounded system. The other vehicle must also be a 12-volt negative grounded system. Do not use your mower to start other vehicles.

8011-642

Jumper cable connection

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Ignition Switch Parking BrakeThrottle Control Refueling Choke ControlAlways use the high position F to transport Fuel Shut Off ValveMower Deck Lifting Lever TrackingManual Transport Blade Control LeverSteering TrainingStarting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceEvery 50 hours Battery To clean battery and terminalsAlways use protective glasses when handling the battery Tire Pressures Safety SystemBelts Deck BeltTo replace deck belt Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckCaster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LubricationSteering Control Shafts Front Wheel MountFront Wheel Bearings Deck spindleProblem Cause TroubleshootingTroubleshooting Winter Storage ServiceSchematic Technical Data Torque SpecificationsStandard Hardware SpeedZTR 30 CA EngineTransmission Overall dimensions EquipmentProductivity CE Requirements USA RequirementsDelivery Service Service JournalAfter 5-10 Hours Hour ServicePerform the 25-hour service At Least Once Each Year Page 115 312327R1 01/21/10

115312327R1, 966504101, SPDZTR 30 CA specifications

The Dixon SPDZTR 30 CA, reference number 966504101 and part number 115312327R1, is a high-performance machine designed for various industrial applications where precision and durability are paramount. This state-of-the-art equipment is engineered for exceptional performance, making it an indispensable asset in many manufacturing environments.

One of the standout features of the SPDZTR 30 CA is its robust construction. The machinery is built from high-grade materials that offer extensive resistance to wear and tear, ensuring long-term reliability and reduced maintenance costs. This feature is particularly crucial in industries where the machines are subject to heavy workloads and harsh conditions.

Another key characteristic is its advanced technology integration. The Dixon SPDZTR 30 CA incorporates an intelligent control system, which enhances operational efficiency by allowing for precise adjustments to settings based on real-time data analysis. With this system, operators can monitor the performance and make informed decisions, leading to optimized processing times and improved productivity.

Safety is a priority with the SPDZTR 30 CA. It comes equipped with several safety features designed to protect operators and minimize the risks associated with heavy machinery. These features include emergency stop buttons, protective guards, and advanced sensors that detect potential hazards, ensuring that operations run smoothly without compromising safety.

Versatility is another hallmark of the Dixon SPDZTR 30 CA. The machine can be adapted for a wide range of applications, making it suitable for various sectors including automotive, aerospace, and construction. Whether used for cutting, shaping, or assembling components, its high adaptability makes it an excellent choice for businesses looking to maximize their production capabilities.

Moreover, the SPDZTR 30 CA is user-friendly, featuring an intuitive interface that allows operators to navigate through different functionalities with ease. Training time is significantly reduced thanks to the straightforward design, allowing businesses to focus on productivity rather than complicated operational procedures.

In conclusion, the Dixon SPDZTR 30 CA, with its unique combination of durability, advanced technology, safety features, versatility, and user-friendly design, stands out as a premier choice for industries requiring reliable and efficient machinery. Its robust capabilities ensure that it can handle even the most demanding tasks, making it a valuable addition to any manufacturing operation.
Top Page Image Contents