Oki 6200E manual Network Error Messages, Network Print Server Utility

OkiLAN 6200e Plus User’s Guide

•Verify that the printer is on-line and ready.

•Verify that the Network Print Server is configured correctly.

•If you suspect any of the cables are bad, swap them with cables you know are working.

Network Error Messages

Network range exceeded during router power up— There are too many nodes on the network segment. The Network Print Server cannot find a free node number. Remove some of the other nodes on the net- work or expand the network range for this segment of the network.

Network Print Server Utility

Network Print Server does not show up in utility— If the Network Print Server does not appear in the util- ity, try the following:

•Print a configuration sheet for name and zone information. Run the Chooser and select the cor- rect zone.

•Verify that the Network Print Server is powered on and appears in the Chooser. If not, refer to general EtherTalk troubleshooting.

•Verify that the Macintosh you are using is running Phase 2 EtherTalk.

•Compare the zone in which the Network Print Server appears in the Chooser to the zones searched. Search the same zone where the Net- work Print Server appears in the Chooser.

Troubleshooting 194